Smokin Gator SASS #29736 Posted February 2, 2021 Share Posted February 2, 2021 1 hour ago, Jasper Agate said: Gator, Yes , my shooting partner has them for his OMV's. They work great! Jasper Thanks! Have you ever measured the cylinder throats or pushed different sized bullets through them? What diameter are you loading? Thanks again. Link to comment Share on other sites More sharing options...
Marshal TKD, Sass # 36984L Posted February 2, 2021 Share Posted February 2, 2021 When I was looking doing this project with NRV's I called Ruger. At that time said they would not make a 38-40 due to the possibility of the rim touching, they also explained that the 38-40 case was inside of their minimum distance for space between case rims. Alan Harton is who I talked to about this conversion. He said the cases might stick a little due to variances in case rim between manufactures. Link to comment Share on other sites More sharing options...
Goody, SASS #26190 Posted February 2, 2021 Share Posted February 2, 2021 Might check with Snake Oil George. I think he did a couple for a friend of mine. Link to comment Share on other sites More sharing options...
Sixgun Symphony #62632 Posted February 2, 2021 Share Posted February 2, 2021 I seem to remember that Ruger made a short run of Blackhawk chambered in .38-40 years ago. Link to comment Share on other sites More sharing options...
Dang It Dan 13202 Posted February 2, 2021 Author Share Posted February 2, 2021 6 hours ago, Isom Dart, SASS#8096 said: Dan, it's no problem with OMV's. About '06-'08 , wanted a pair of 38-40's, found a pair of SS, OMV in 38-40/40S&W. They were ok but, I don't like "shiny" guns. So I didn't shoot them much. Ruger didn't make blue OMV's in 38-40. So, bought two blue OMV 357's, one new, one used at about $425-450.00 each, pulled the barrels , sent them one way, sent the cylinders another. In about three to four weeks ,I had a pair of "blue" OMV's in 38-40. I think it was about $375.00/gun, dividing up between cylinder and barrel. Down the line I acquired a couple of late 3rd gen. Colts in 38-40, shot them for a while . Then, thought I'd switch between them. Didn't work for me ,,,,,,,,, they're to different. Oh ,,,, everything is with B/P. YMMV, Isom ISOM!!!! Buddy I am sooooooo glad to hear from you. You will always be imprinted in my memories as one of the best examples of true cowboys this sport has to offer. I hope you are well. I hope to see you down the trail soon. Link to comment Share on other sites More sharing options...
Three Foot Johnson Posted February 2, 2021 Share Posted February 2, 2021 28 minutes ago, Sixgun Symphony #62632 said: I seem to remember that Ruger made a short run of Blackhawk chambered in .38-40 years ago. Link to comment Share on other sites More sharing options...
Dang It Dan 13202 Posted February 2, 2021 Author Share Posted February 2, 2021 Folks, It does my heart good to see the interest in my current distraction. I promise to keep everyone posted on how this works out, hell even my usually stoic gunsmith said he thought this would be an interesting project to work on. Talk to you soon. Link to comment Share on other sites More sharing options...
Smokin Gator SASS #29736 Posted February 2, 2021 Share Posted February 2, 2021 I called Ruger cylinder (brc rifles) and talked to them. They said the cylinder throats are .429. I ordered one and may get another if I like it. Link to comment Share on other sites More sharing options...
Hawkeye Kid Posted February 3, 2021 Share Posted February 3, 2021 Dan, You want to contact Boomstick Arms, Jason Wilmer. I had A pair done about 3 years ago. Revolver, octagon barrel, and short stroke, $2430 out the door for both. Link to comment Share on other sites More sharing options...
Irish Pat Posted February 3, 2021 Share Posted February 3, 2021 There is a nice bisley vaquero in 38-40 with an extra 40 S&W cylinder for $1,050 on Guns International Link to comment Share on other sites More sharing options...
Smokin Gator SASS #29736 Posted February 3, 2021 Share Posted February 3, 2021 When I called to find out about the 44-40 cylinder we talked for a while and both of us like 44 Special and 44-40. It sounded like the cylinder would fit the 44 mag Vaqueros. Finally he asked me where I am located. When I told him California he said "Oh, I'm sorry." At first I thought he meant that they wouldn't ship to Ca. They do, he said he was just sorry to hear I live there. Got one ordered. Link to comment Share on other sites More sharing options...
Irish Pat Posted February 4, 2021 Share Posted February 4, 2021 Just buy the Bisley swap out the barrels and cylinders and sell the Bisley outfitted with your old Barrel and cylinder. That seems pretty simple to me Link to comment Share on other sites More sharing options...
Preacherman Posted February 4, 2021 Share Posted February 4, 2021 A Bisley, just change grip frame trigger and hammer and you're done. The simplest way. Link to comment Share on other sites More sharing options...
Irish Pat Posted February 4, 2021 Share Posted February 4, 2021 Great idea Preacher. In fact,he could just shoot the Bisley. There are now two Bisleys for sale on Guns International on 38-40/extra 40 S&W cylinders included.... Irish ☘️ Pat Link to comment Share on other sites More sharing options...
Dang It Dan 13202 Posted February 4, 2021 Author Share Posted February 4, 2021 DJ, as I said, I am using an old model Vaquero, but I do appreciate your input. Thanks, Dan Link to comment Share on other sites More sharing options...
Jabez Cowboy,SASS # 50129 Posted February 6, 2021 Share Posted February 6, 2021 There is a fellow Up here that uses .44-40 cases in his NRV in .45 Colt and Shoots .456 diameter Bullets ... His bore is over sized and this is the Cheap fix for that issue , He has had ZERO issues with rim interference .... He casts .456 Bullets from a LEE mold the cost of having LEE make an over size mould was minimal . And he uses Hornady New Diamention Dies for .45 Colt crimping with a Lee factory Crimp Die for .45 Colt ... And the Rim diameter on both .44-40 and .38-40 as made by star-line are the same .... Being that one of my Grandads Was a Scot, I mostly use Star-Line .44-40 brass in my .38-40 guns to save 80 dollars a thousand over their price for .38-40 .... Jabez Cowboy Link to comment Share on other sites More sharing options...
Noz Posted February 6, 2021 Share Posted February 6, 2021 On 2/1/2021 at 5:24 PM, Waxahachie Kid #17017 L said: I know U.S.F.A., once-upon-a-time, had a revolver with two cylinders...one in .41 Colt, and one in .38 WCF. I am not sure, but seems like Ruger, or someone, had a revolver with two cylinders, as well...one in 10mm, and the other in .38 WCF. I don't know...would it be more feasible to try this conversion with a .41 mag Ruger...rather than a .357 magnum? I haven't checked the bullet dimensions on .41 mag, or .38 WCF, yet, so I am just speculating. 41 MAG BULLET IS .410. Link to comment Share on other sites More sharing options...
Tom Bullweed Posted February 7, 2021 Share Posted February 7, 2021 Dan, the .38 WCF is a great round for smokeless or bp/subs. One issue for many is that most sizing dies do not form the far enough down the case, often .02-.04" short. Not a huge deal in the rifle since the thin brass can be swayed as the lever is closed. This can be a problem in the revolver. You may want to talk to your 'smith about this. You may want to get your reloading stuff first so that you can know the shoulder length. Link to comment Share on other sites More sharing options...
Jabez Cowboy,SASS # 50129 Posted February 7, 2021 Share Posted February 7, 2021 Hornady Dies are properly Dimensioned and work fine .... As do the RCBS "Cowboy Dies ".... Jabez Cowboy Link to comment Share on other sites More sharing options...
Jasper Agate Posted February 7, 2021 Share Posted February 7, 2021 On 2/2/2021 at 11:22 AM, Smokin Gator SASS #29736 said: Thanks! Have you ever measured the cylinder throats or pushed different sized bullets through them? What diameter are you loading? Thanks again. Gator, Sorry it took so long to get back to you!! As far as I know he has done no measuring. He uses .429 bullets. Jasper Link to comment Share on other sites More sharing options...
Smokin Gator SASS #29736 Posted February 8, 2021 Share Posted February 8, 2021 1 hour ago, Jasper Agate said: Gator, Sorry it took so long to get back to you!! As far as I know he has done no measuring. He uses .429 bullets. Jasper Thanks. I did talk to them and they said the throats are .429. I ordered 1 to see how it works. Link to comment Share on other sites More sharing options...
Moses, SASS #5964 Posted February 11, 2021 Share Posted February 11, 2021 Dang it Dan your project is doable. A number of years ago West Fargo converted a 3 screw 357 to a 44 special / 44/40 convertable for me. later we converted 2 more to 38/40 for sass. I changed all 3 to bisley conversions. Moses #5964 life Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.