Earl Brasse, SASS #3562 Posted December 30, 2020 Share Posted December 30, 2020 WTB Annealing Machine Looking at Bench Source etc. used before new. What have you got ??? Link to comment Share on other sites More sharing options...
Earl Brasse, SASS #3562 Posted January 1, 2021 Author Share Posted January 1, 2021 btt Link to comment Share on other sites More sharing options...
Bailey Creek,5759 Posted January 1, 2021 Share Posted January 1, 2021 youtube has videos on how to Build One . Link to comment Share on other sites More sharing options...
Earl Brasse, SASS #3562 Posted January 4, 2021 Author Share Posted January 4, 2021 Looking for one to buy, thanks Link to comment Share on other sites More sharing options...
Smokey Squibbs Posted January 4, 2021 Share Posted January 4, 2021 I've purchased an Anneeleze and it runs perfectly. I should have done it years ago. I would recommend one. Link to comment Share on other sites More sharing options...
Earl Brasse, SASS #3562 Posted January 7, 2021 Author Share Posted January 7, 2021 Thanks Smokey, I like the feeder idea. I was thinking of the Bench Source as it would be able to do rimmed cases & also do from 25-20 WCF to .577 Snider. Link to comment Share on other sites More sharing options...
Earl Brasse, SASS #3562 Posted January 15, 2021 Author Share Posted January 15, 2021 btt, then again there also are electric ones Link to comment Share on other sites More sharing options...
Tucker McNeely Posted January 15, 2021 Share Posted January 15, 2021 You looking for mass production or the ability to anneal? Link to comment Share on other sites More sharing options...
Salty Pawl Posted January 15, 2021 Share Posted January 15, 2021 9 hours ago, Earl Brasse, SASS #3562 said: btt, then again there also are electric ones I looked at them all, and went with the AMP annealer. https://www.ampannealing.com/index/ Link to comment Share on other sites More sharing options...
Grave Robber, SASS #57546 Posted January 15, 2021 Share Posted January 15, 2021 If you're still looking there is a fellow on YouTube that is producing for sale one that will anneal multiple calibers up to 50 BMG. His channel is Elfster's Rifles and Reloading. Link to comment Share on other sites More sharing options...
Earl Brasse, SASS #3562 Posted January 16, 2021 Author Share Posted January 16, 2021 Salty, that might be the way to go but it's on a steep hill. BUT... not having to anneal outside in Arizona in the summer next to a flame does sound good. What all are you doing with yours & did you get a feeder? Grave Robber, Interesting & basic but a feeder would be handy. Don't see much info on the web of anyone buying/using yet but sounds like they are just getting started. Tucker, Just for me, but thinking of big batches of say 1k + of .44 Russian, .45 Colt etc, etc & then smaller amounts of rifle brass & for case forming. Link to comment Share on other sites More sharing options...
Sedalia Dave Posted January 16, 2021 Share Posted January 16, 2021 25 minutes ago, Earl Brasse, SASS #3562 said: Grave Robber, Interesting & basic but a feeder would be handy. Don't see much info on the web of anyone buying/using yet but sounds like they are just getting started. I built one similar to the on in the video GR posted. Works exceptionally well and will do a lot of brass in a short time. Cost me less than a hundred bucks. One thing to note is that case feeders don't work very well if at all with rimmed cases. GR thanks for the video. I'm looking to upgrade mine with some of the features in that video. Link to comment Share on other sites More sharing options...
Tucker McNeely Posted January 16, 2021 Share Posted January 16, 2021 I did it el cheapo. A cordless drill from harbor freight I wasn’t worried about burning up running at low speed. Use a deep well socket. Turn the case slowly in the flame of your torch so that it just starts to glow in the dark. Not much to it. As coffinmaker has posted it is mind numbing but it works to help seal straight walled cases for BP. I tried to anneal my 45 colt brass for trail boss. Didn’t care for it. No real benefit and it seemed to make the extractor work harder to pull the case out of the chamber. I anneal my 38s to use w/ APP. Works like a charm. Link to comment Share on other sites More sharing options...
largo casey #19191 Posted January 16, 2021 Share Posted January 16, 2021 Saw one on Ebay yesterday. Largo Link to comment Share on other sites More sharing options...
Tequila Shooter Posted January 16, 2021 Share Posted January 16, 2021 +1 for the Anealezz. Been using mine for about a year for .45c, I thought it was a good balance of price and accuracy. Caliber changes is just a matter of switching out 2 wheels. Link to comment Share on other sites More sharing options...
Salty Pawl Posted January 17, 2021 Share Posted January 17, 2021 On 1/15/2021 at 7:18 PM, Earl Brasse, SASS #3562 said: Salty, that might be the way to go but it's on a steep hill. BUT... not having to anneal outside in Arizona in the summer next to a flame does sound good. What all are you doing with yours & did you get a feeder? It is expensive, and I did not get the feeder. My main reason for getting it was safety, no open flame. Not to mention, there is no guess work in the process like a flame thrower model. I like the fact that I can use it anywhere in my house. You don't need the Auto Feeder, unless your reloading machine is full auto. I reload for myself and the AMP is perfect. Nothing wrong with any of the other machines mentioned above. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.