Jump to content
SASS Wire Forum

Sold local!! SBD with 6 Cal Conversions +Lee Press


El Catorce

Recommended Posts

Newly refurbished SDB with Dillon Strong Mount, powder measure, large & small primer magazine tubes & pick up tubes, Large & small primer cups, tool set and mount and larger powder measure bar. I also have a Lee single stage press mounted to the front that I used for bullet pulling and bullet sizing.

 

The bundle comes with 6 of the most popular pistol caliber conversion sets. 5 of these also come with tool heads.

 

.38/.357 w/tool head (currently installed in the press) and three seating stems (flat, round and wadcutter)

 

 .38 ACP with tool head

 

9mm with tool head and two seating stems (flat and round) but one locator button is a 2 instead of a 3

 

.45 ACP with tool head and two seating stems (flat and round)

 

44sp/44mag with tool head and two seating stems (flat and round)

 

.40/10mm with two seating stems (flat and round)-NO tool head but just swap out with any other caliber's if .40 is a more common cal for you to load than the one you swapped with.

 

I'

 

 

 

IMG_8505.jpg

IMG_8511.jpg

IMG_8510.jpg

IMG_8513.jpg

IMG_8503.jpg

IMG_8502.jpg

IMG_8498.jpg

IMG_8500.jpg

IMG_8497.jpg

IMG_8501.jpg

IMG_8499.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.