Cibola Al Posted November 24, 2020 Share Posted November 24, 2020 I recently had the opportunity to handle a Taylor’s & Co New Model 3 Frontier (a Uberti top break revolver with a significantly different grip profile than the Schofield). I really liked the way it looked and felt in my hand, but it has an adjustable rear sight which makes it a no go in my chosen shooting categories. It occurred to me that a couple of minutes with a soldering iron or some JB weld and the rear sight would be very much “fixed”. Further reflection on this dastardly notion made me think that although I might then meet the technical requirement of fixed sights, I was probably missing the boat from a “spirit of the game” point of view. I suspect the reason for the fixed sight rule in some categories is not because shooters are going to dial in their poi while in the thick of a match, but rather the founders wanted folks shooting guns that were as close in appearance to the originals as possible. I imagine if I showed up to a monthly match with the gun, probably nobody would say much, but the whole SOTG notion is pretty important to our sport (imho) so I’ll just leave that whole mess alone. It’s kind of windy and cold today, my chores are done, so I sit by the wood stove and ponder stuff like this. Link to comment Share on other sites More sharing options...
Texas Red Posted November 24, 2020 Share Posted November 24, 2020 CA, All Good Points To Ponder..... TR Link to comment Share on other sites More sharing options...
Creeker, SASS #43022 Posted November 24, 2020 Share Posted November 24, 2020 Adjustable to fixed sight conversion is done by welding or in very few cases - part interchange. Simply "modifying" an adjustable sight so that it is still the same sight; but just doesn't move is not compliant with the fixed sight requirement. Link to comment Share on other sites More sharing options...
Cibola Al Posted November 24, 2020 Author Share Posted November 24, 2020 8 minutes ago, Creeker, SASS #43022 said: Adjustable to fixed sight conversion is done by welding or in very few cases - part interchange. Simply "modifying" an adjustable sight so that it is still the same sight; but just doesn't move is not compliant with the fixed sight requirement. Thanks, I suspected that someone would have already given this some thought and deliberation. Link to comment Share on other sites More sharing options...
Tequila Shooter Posted November 24, 2020 Share Posted November 24, 2020 Good question, but it leaves me wondering why (if it’s not how the original gun was) would they have an adjustable sight. Which leads me to think if it was on the original should that make the gun legal for SASS? I’m pretty sure pards more knowledgeable than me will weigh in and offer reasons and history (besides the Ruger factor) for the rule. Link to comment Share on other sites More sharing options...
PaleWolf Brunelle, #2495L Posted November 24, 2020 Share Posted November 24, 2020 2 hours ago, Cibola Al said: I recently had the opportunity to handle a Taylor’s & Co New Model 3 Frontier (a Uberti top break revolver with a significantly different grip profile than the Schofield). I really liked the way it looked and felt in my hand, but it has an adjustable rear sight which makes it a no go in my chosen shooting categories. ... That is basically the same revolver as the Beretta "Laramie". This same allowed modification would apply: Quote Barrel mounted rear sights are allowed on open-top revolvers. The Beretta “Laramie” rear latch with the adjustable rear sight may be replaced with the rear latch (with fixed sight) from the “Russian” Model to be allowed as a fixed sight model revolver. SHB p.37 Check with VTI for the replacement part to convert from "adjustable" to "fixed". Link to comment Share on other sites More sharing options...
Bailey Creek,5759 Posted November 25, 2020 Share Posted November 25, 2020 I don't see what the Big Deal is. Its not like the Sights are going to give an advantage. I have a Problem with Henry being allowed. I know it is an American Company. I believe its a 100 yrs late. Don't like the Round Bolt. Link to comment Share on other sites More sharing options...
Imis Twohofon,SASS # 46646 Posted November 25, 2020 Share Posted November 25, 2020 I have wondered if a non-adjustable replacement might not be allowed to be mounted/screwed in place of Ruger Blackhawk sights, with a lower front sight, eliminating the permanence and difficulty of returning it to stock later. I know lots of folks shot Blackhawks early in the game until Vaqueros and Colt clones became more available. I still have three. Imis Link to comment Share on other sites More sharing options...
PaleWolf Brunelle, #2495L Posted November 25, 2020 Share Posted November 25, 2020 The only approved method for converting an adjustable-sighted Ruger (Old Army or Blackhawk) to fixed is very specifically spelled out in the SHB on page 38. Revolvers with adjustable sights are allowed in Open, Age-Based, and B-Western categories. Proposals to completely eliminate the revolver sight restrictions have been met with little to no interest. Link to comment Share on other sites More sharing options...
Yusta B. Posted November 26, 2020 Share Posted November 26, 2020 1 hour ago, PaleWolf Brunelle, #2495L said: Proposals to completely eliminate the revolver sight restrictions have been met with little to no interest. Right - we have bigger fish to fry - like Rank Points vs ....... (Oh crap ! Did I use my out loud voice again ? ) Link to comment Share on other sites More sharing options...
PaleWolf Brunelle, #2495L Posted November 26, 2020 Share Posted November 26, 2020 2 hours ago, Yusta B. said: Right - we have bigger fish to fry - like Rank Points vs ....... (Oh crap ! Did I use my out loud voice again ? ) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.