Pee Wee #15785 Posted November 5, 2020 Share Posted November 5, 2020 Getting ready for a major bank account hit. I have both a C. Sharps in .45-70 used and a Browning High Wall with a barrel replacement in .38-55. No sights yet on the Browning but the C. Sharps has their Vernier Tang Sight that has to soft a metal and the retaining spring has scraped enough that there is no notch in the sight to lock in place when in the up right position. What sight would work on the sharps to a 1000 yards? What sight would be best for the Browning to 600 yards? I might try the Browning to 1000 yards knowing that the .38-55 isn't a good 1000 yard round. Have been looking at MVA #103 Long Range Buffalo, Lee Shaver SUPER GRADE SOULE TYPE SIGHTS, Baldwin Long Range Sights, Pedersoli but don't know which as so many, Kelley Long Range Soule Sight, and Hoke Long Range. I like the MVA being made in the USA and warranty their products for life against manufacturing defects. If you use one of the Soule sights I list please tell me how you like it and what you don't like about it.Prices are all in the same ball park, HIGH! Link to comment Share on other sites More sharing options...
Desert Pete SASS #42168 Posted November 5, 2020 Share Posted November 5, 2020 My vote goes to MVA. I have two of the Buffalo Soule on C. Sharps 1885 Highwalls. Both are vastly more accurate and precisely adjustable than the shooter. On my 45-90 I have accurately shot out to 1200 yards. I have also shot the same rifle with 40 minutes of windage. Maybe not so accurately! I needed a screw and stopped by the MVA factory on the way home from Forsyth, MT. They fixed me up in just a few minutes. Good sights and good folks. Link to comment Share on other sites More sharing options...
Boulder Canyon Bob# 32052L Posted November 5, 2020 Share Posted November 5, 2020 I have both MVA and Lee Shaver economy sights, honestly I really can't tell the difference, Shavers are certainly less expensive. Link to comment Share on other sites More sharing options...
Three Foot Johnson Posted November 5, 2020 Share Posted November 5, 2020 I've got three Lee Shaver Deluxe sight sets on two Sharps and one High Wall. I just bought my first MVA and mounted it on an 1895 Marlin. I'm perfectly happy with the Lee Shavers, and usually place 1st or 2nd in CAS side matches with them. I haven't had the opportunity to shoot the Marlin yet, but the sight appears to be very well built. The MVA took 3 1/2 weeks to arrive, which is about right, but had the wrong base. I called and got them busy making the correct base, which took another seven and a half weeks to arrive, so, all told, eleven weeks, which seems excessive. BUT, the owner had a death in the family during all this, so there were extenuating circumstances. Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted November 5, 2020 Share Posted November 5, 2020 Cry one time and go with MVA Buffalo Long Range Soule Sight. It has twice the windage the std Soule has. You also want a Hadley Eye Cup. The MVA #113 front sight a good choice. OLG Link to comment Share on other sites More sharing options...
Ozark Shark Posted November 5, 2020 Share Posted November 5, 2020 4 minutes ago, The Original Lumpy Gritz said: Cry one time and go with MVA Buffalo Long Range Soule Sight. It has twice the windage the std Soule has. You also want a Hadley Eye Cup. The MVA #113 front sight a good choice. OLG +1 That's the combination I'm using. It's more accurate than I am. Link to comment Share on other sites More sharing options...
Hoss Posted November 5, 2020 Share Posted November 5, 2020 I have a set of Kelley on a HiWall and a Win 76. Excellent. MVA on a Sharps. Also excellent. (The Sharps came with MVA sights). Both are top quality. I think the Kelley are more attractive, brass and CCH. My Uberti-Win 76 came with Pedersoli sights. I did not like them at all. For me, hard to read and the quality was just not the same. I still have them in a box. Probably ought to sell them! Dont scrimp on sights. For 1000 yd distances you are also going to want a front sight with a level. A Hadley eye cup is also nice. You can adjust the aperture according to the light conditions. I have the “magnum” size on my Sharps. Link to comment Share on other sites More sharing options...
Pee Wee #15785 Posted November 5, 2020 Author Share Posted November 5, 2020 I left out the Hoke Long Range. Link to comment Share on other sites More sharing options...
Noah Cash Posted November 5, 2020 Share Posted November 5, 2020 I agree with OLG AND Ozark, 113 front sight, Buffalo Soule in appropriate length for intended range and you are good to go! Link to comment Share on other sites More sharing options...
Sedalia Dave Posted November 5, 2020 Share Posted November 5, 2020 Nice thing about MVA is that one staff can be on several bases. Link to comment Share on other sites More sharing options...
Clyde Henry 7046 Posted November 6, 2020 Share Posted November 6, 2020 9 hours ago, The Original Lumpy Gritz said: Cry one time and go with MVA Buffalo Long Range Soule Sight. It has twice the windage the std Soule has. You also want a Hadley Eye Cup. The MVA #113 front sight a good choice. OLG +2! If you are shooting out to 1000 yards, then you want as much windage as possible. I have the MVA Buffalo Long Range Soule sight and use it on everything from 200 yards out to 1200 yards. Yes, and get the Hadley Eye Cup too. Link to comment Share on other sites More sharing options...
Buckshot Sheridan Posted November 6, 2020 Share Posted November 6, 2020 I was split between MVA and Hoke. Ended up going with Hoke as I like the wind age setup a bit better. The vernier scale for the wind age is entirely on the two sliding surfaces just as the elevation scale is, this eliminates any potential error in adjusting due to backlash, and the wind age adjustment is also physically more compact. In reality wouldn’t have any issue with either sight. Considered Baldwin but when Inspoke with him he wasn’t willing to make a taller staff which I would be looking for in the future. Link to comment Share on other sites More sharing options...
John Boy Posted November 6, 2020 Share Posted November 6, 2020 MVA does not make a Soule vernier but Baldwin does. I have a Baldwin Mid Range & Long Range and recommend them. Suggestion: Buy, one this way: a Long Range staff for both rifles with 2 different bases. Then you just put the Long Range staff inter changeably on each, one for each different rifle. Basically saves you close to $400 I have Pedersoli's too but intended to buy Baldwin bases for all the rifles and use the staff's interchangeably Sharp's, HiWall's and extra barrels for the CPA Stevens 44 1/2 Black Powder Sights Comes standard with 5 hole Adjustable eye piece. (Hadley Cup) Long Range Sights $485.00 Windage - 30 minutes left or right Mid-Range Sights $415.00 Windage - 15 minutes left or right Link to comment Share on other sites More sharing options...
Pee Wee #15785 Posted November 7, 2020 Author Share Posted November 7, 2020 Thanks for all the feedback, now to call MVA, Hoke, and Baldwin. I was leaning towards Hoke till all the feed back. I like the MVA life time warranty but I need to talk to Baldwin. Link to comment Share on other sites More sharing options...
irish ike, SASS #43615 Posted November 7, 2020 Share Posted November 7, 2020 MVA, get the tallest Soule they have and then individual bases for each rifle. Saves money. I would get the second base screw for the site. I leave it in the gun I'm not using so the threads stay protected. I have aSharps and an 1885 C-Sharps high wall. Link to comment Share on other sites More sharing options...
John Boy Posted November 7, 2020 Share Posted November 7, 2020 Error on my part, MVA does make soule verniers Link to comment Share on other sites More sharing options...
Charlie Harley, #14153 Posted November 10, 2020 Share Posted November 10, 2020 I recently bought a rear and front sight from MVA. Prior to that I bought a set of sights from Lee Shaver. I’ll only do business with Mr Shaver going forward. Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted November 10, 2020 Share Posted November 10, 2020 43 minutes ago, Charlie Harley, #14153 said: I recently bought a rear and front sight from MVA. Prior to that I bought a set of sights from Lee Shaver. I’ll only do business with Mr Shaver going forward. Why? OLG Link to comment Share on other sites More sharing options...
Charlie Harley, #14153 Posted November 10, 2020 Share Posted November 10, 2020 It took 4 months to receive the sights, which would have been okay had I not been told that it would only take one month, and every subsequent inquiry was answered with “next week”. When the sights finally arrived, the slot in the #111 globe front sight was too narrow to fit a pair of stacked aperture inserts. When I called MVA, they said it must have been damaged in shipping, even though the box was pristine upon arrival. They said to send it back and they’d fix it, but by that time I’d lost trust that I’d see the sight again in a timely manner. An hour or so with a small file fixed the situation mostly. It’s on my rifle and working fine now. To be fair, others have had great experience with MVA. The rear sight, a #130, appears to be very well made. I just had a bad experience and don’t wish to repeat it. Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted November 11, 2020 Share Posted November 11, 2020 12 hours ago, Charlie Harley, #14153 said: It took 4 months to receive the sights, which would have been okay had I not been told that it would only take one month, and every subsequent inquiry was answered with “next week”. When the sights finally arrived, the slot in the #111 globe front sight was too narrow to fit a pair of stacked aperture inserts. When I called MVA, they said it must have been damaged in shipping, even though the box was pristine upon arrival. They said to send it back and they’d fix it, but by that time I’d lost trust that I’d see the sight again in a timely manner. An hour or so with a small file fixed the situation mostly. It’s on my rifle and working fine now. To be fair, others have had great experience with MVA. The rear sight, a #130, appears to be very well made. I just had a bad experience and don’t wish to repeat it. WOW, I have never had any issue like that with MVA. OLG Link to comment Share on other sites More sharing options...
The Rainmaker, SASS #11631 Posted November 12, 2020 Share Posted November 12, 2020 Shaver sights work great and his design does not utilize a slot for the inserts. Stack away! Link to comment Share on other sites More sharing options...
Pee Wee #15785 Posted November 13, 2020 Author Share Posted November 13, 2020 MVA and Lee Shaver win. one each to see which is more to my liking. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.