Chert Rock Chuck Posted October 29, 2020 Share Posted October 29, 2020 Need components to convert my 550 from large to small primers. Thanks for looking, Chert Rock. Link to comment Share on other sites More sharing options...
X Mark Posted October 29, 2020 Share Posted October 29, 2020 The folks at Dillon can help you out. They are quick ,courteous ,and cheap ! I've ordered small parts from them and they sent it for FREE ! Although , they will probably charge you for a small primer tube and the primer slide . Good luck and shoot straight ! X Mark Link to comment Share on other sites More sharing options...
Ethan Cord Posted October 31, 2020 Share Posted October 31, 2020 The small primer slide (part # 14282) is backordered at Dillon, as are most things as we near the election. 9mm Dillon dies appear to be made of unobtainium! I have a couple of used 550 primer slides. Dillon gets about $26 new plus tax and shipping. I'll send you one with experience (used) via USPS flat rate shipping for 20 yankee dollars. I don't have any spare small primer tubes. Link to comment Share on other sites More sharing options...
Chert Rock Chuck Posted October 31, 2020 Author Share Posted October 31, 2020 5 hours ago, Ethan Cord said: The small primer slide (part # 14282) is backordered at Dillon, as are most things as we near the election. 9mm Dillon dies appear to be made of unobtainium! I have a couple of used 550 primer slides. Dillon gets about $26 new plus tax and shipping. I'll send you one with experience (used) via USPS flat rate shipping for 20 yankee dollars. I don't have any spare small primer tubes. Thanks Ethan, I’d like that very much. Maybe the small, inner primer tube from my 650 will fit the 550....? Could I be so fortunate? Here’s to hoping. Sending PM with information. Many thanks, Chert Rock. Link to comment Share on other sites More sharing options...
grey ghost Posted October 31, 2020 Share Posted October 31, 2020 No, they dont. I tried it only in reverse, 550 in a 650. I had a primer tube detonation within the first 10 primers. The tips are different and will cause the primers to not feed properly Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.