boston1 Posted October 8, 2020 Share Posted October 8, 2020 Anyone know a good gunsmith in southeast Michigan who works on the New Vaquero? Link to comment Share on other sites More sharing options...
Rafe Conager SASS #56958 Posted October 8, 2020 Share Posted October 8, 2020 Lassiter is in Ohio he does awesome work. Rafe Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted October 8, 2020 Share Posted October 8, 2020 What do you need done? OLG Link to comment Share on other sites More sharing options...
Sarge Posted October 8, 2020 Share Posted October 8, 2020 PM Sent. Link to comment Share on other sites More sharing options...
boston1 Posted October 10, 2020 Author Share Posted October 10, 2020 Ok so thanks for the information, problem solved for some reason I suddenly developed what I thought was transfer bar pinch I also had 2 lite primer hits in about 100 shots taking gun apart I then had cylinder lock up, and fixed it there still seemed to be transfer pinch with trigger not resetting but did not make sense was dry firing with different hammer when cylinder locked up again. opened and closed gate and it freed up pointed barrel up and felt something hit my arm it was a plunger and spring found that the plunger spring and hex screw that keeps cylinder from turning backwards with gate open had fallen out this is what caused the trigger not to reset and the firing pin is coming out further and stronger it must have slowly been coming out now I have a free spin don't need a gunsmith Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.