Trigger Mike Posted October 7, 2020 Share Posted October 7, 2020 Why do you not put grease on the end of tge oprod where it goes into the gas plug? Seems to me since it metal to metal contact that you would. The garand is the same, why not put grease at the end of the oprod? Link to comment Share on other sites More sharing options...
Utah Bob #35998 Posted October 7, 2020 Share Posted October 7, 2020 The manual tells you exactly where to gease the weapon for optimal performance. the reason the op rod is not greases is because it doesn't neet to be. You don't want anything going into that gas cylinder that can cause fouling problems, especially when mixed with the carbon reisdue. Here's a nice treatise on M1 greasing. http://www.garandgear.com/m1-garand-grease And from another source. Quote If you do not have Lubriplate, or the other (Government specified) gun grease, then there are several greases that are available through gun stores (Hoppes #9 Gun Grease comes to mind), that will work. The M1 Garand system is a machine, and machines need to be lubed with grease. Oil is for cleaning and coating the metal surfaces to prevent rust, and except for -10 Degrees F. to about +10 Degrees F. it will not provide adequate lubrication for the machine.DO NOT LUBE THE GAS CYLINDER, PERIOD!!! It is OK to wipe out the Gas Cylinder, and other parts of that system with a very lightly oiled cleaning patch for long term storage, but when you plan to shoot it you must then wipe it dry, before shooting. Link to comment Share on other sites More sharing options...
Pat Riot Posted October 7, 2020 Share Posted October 7, 2020 Don't grease that op rod, TM. The heat will harden the grease. Leave it dry with no lube. Link to comment Share on other sites More sharing options...
Trigger Mike Posted October 7, 2020 Author Share Posted October 7, 2020 Thankfully I have plenty of grease pots from my garands but will not grease the oprod then. I even found my m 14 cleaning kit I got from the cmp over 20 years ago for when I was planning on getting a m1a. The m1a even came with a copy of the army manual for the rifle. Link to comment Share on other sites More sharing options...
Pat Riot Posted October 7, 2020 Share Posted October 7, 2020 45 minutes ago, Trigger Mike said: Thankfully I have plenty of grease pots from my garands but will not grease the oprod then. I even found my m 14 cleaning kit I got from the cmp over 20 years ago for when I was planning on getting a m1a. The m1a even came with a copy of the army manual for the rifle. Taking a very good cue from @Sedalia Dave I recommend Mobil 1 grease for your new toy. Excellent Stuff! Link to comment Share on other sites More sharing options...
Cowtown Scout, SASS #53540 L Posted October 7, 2020 Share Posted October 7, 2020 Tony Ben has some great videos out there. Here is one on lubrication of the M14/M1A Link to comment Share on other sites More sharing options...
Linn Keller, SASS 27332, BOLD 103 Posted October 7, 2020 Share Posted October 7, 2020 As usual, this is of definite use to more than the OP. Many thanks! Link to comment Share on other sites More sharing options...
Muleshoe Bill SASS #67022 Posted October 7, 2020 Share Posted October 7, 2020 I had to clean the oprod and gas cylinder for a friend on his M1A who thought it would be just fine to grease them up . The courts let me off as justifiable homicide Link to comment Share on other sites More sharing options...
Dawg Hair, SASS #29557 Posted October 7, 2020 Share Posted October 7, 2020 3 hours ago, Cowtown Scout, SASS #53540 L said: Tony Ben has some great videos out there. Here is one on lubrication of the M14/M1A This is the site I go to any time I want to know anything about my M1A. He's got dozens of videos on the M1A/M14. Link to comment Share on other sites More sharing options...
Pat Riot Posted October 7, 2020 Share Posted October 7, 2020 30 minutes ago, Muleshoe Bill SASS #67022 said: I had to clean the oprod and gas cylinder for a friend on his M1A who thought it would be just fine to grease them up . The courts let me off as justifiable homicide Damnit Muleshoe Bill! I had to clean my iPhone screen after I read that. Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted October 7, 2020 Share Posted October 7, 2020 When all else fails....... Follow instructions. OLG Link to comment Share on other sites More sharing options...
Trigger Mike Posted October 8, 2020 Author Share Posted October 8, 2020 2 hours ago, The Original Lumpy Gritz said: When all else fails....... Follow instructions. OLG My dad was fond of saying that Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.