Jump to content
SASS Wire Forum

FOUND ONE>> Need "Fat Guy" Leather Belt.


joachim slim

Recommended Posts

Does anyone have any leather big enough to cut me a belt? It needs to be 2 3/4"---3" wide and 68" long.  I dont care if the leather has scratches,  blemishes, brand mark, wrinkle or what ever.  It can be plain, brown or black.  This is just the main belt. I will add my own buckle strap and my own tightening/adjusting strap. (I let someone borrow my belt. When they finally returned it, it was ruined).  Could someone help me out?

Link to comment
Share on other sites

Go to Rural King, they have harnesses for horses that will work for a belt.

Link to comment
Share on other sites

2 minutes ago, DeaconKC said:

Go to Rural King, they have harnesses for horses that will work for a belt.

 

They have it that wide?

 

Link to comment
Share on other sites

I just measured my old duty belt that I made from them. It is 2 1/2", I don't know if it is in 2 3/4".If you have an Amish saddlemaker nearby, they could probably make one up for you.

Link to comment
Share on other sites

68" long from where to where? Do you mean to fit a 68" waist?

Link to comment
Share on other sites

1 hour ago, Springfield Slim SASS #24733 said:

68" long from where to where? Do you mean to fit a 68" waist?

 

.

It is just the main belt. I will add my own buckle strap and tightening strap.

 

Link to comment
Share on other sites

I’ve built belts from these blanks on eBay.  Not as good of leather as the Herman Oak but half the price.   $40 bucks.    If you can build the rest it’s good leather.  
 

this is a rig I built using a blank similar to that but I think four inches.   
 

https://www.ebay.com/itm/Vegetable-Tanned-8-9-3-6MM-Cow-Leather-Tooling-Strap-Belt-Blank-Strip-Three-3-In/153472766115?hash=item23bbb090a3:g:Y~gAAOSw3eRcyx0x

61D02A42-AC11-4309-9F0E-F0EE2979D1AD.jpeg

90CB9585-C04C-4E32-912A-9CC35617B70F.jpeg

Link to comment
Share on other sites

29 minutes ago, Hoss said:

 

That one is only 1 1/2 inches wide. Op wants 2 1/2" or 3" width

Link to comment
Share on other sites

I must have missed that. But I bet thee are others wide enough 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.