Jump to content
SASS Wire Forum

Source for SKB 100 hammers


Three Gun Cole

Recommended Posts

Goody, the firing pin is the part of the hammer that breaks. The odd thing is that just about everyone that carries SKB parts have left hammers in stock, but nobody has right hammers. 

Link to comment
Share on other sites

LIB. My eldest SKB, I picked it up in about 2005. Probably put several thousand rounds through it and another that I picked up in about 2008. Have not broken anything but wood.

 

Reckon someone could machine a new firing pin into the hammer face? Seems like drill a hole, make a pin to fit said hole, drill a cross pin hole, install cross pin to hold firing pin in place.

Link to comment
Share on other sites

Start here ... https://www.skbshotguns.com/shotguns/

Then the recommendation is call SKB, talk to tech support and if need be, send the action to them for repairs.  I found them most accommodating when I had firing pin issues with a model 500 O/U

There is a remote possibility the left and right hammers are the same 

Link to comment
Share on other sites

3 hours ago, John Boy said:

Start here ... https://www.skbshotguns.com/shotguns/

Then the recommendation is call SKB, talk to tech support and if need be, send the action to them for repairs.  I found them most accommodating when I had firing pin issues with a model 500 O/U

There is a remote possibility the left and right hammers are the same 

The left and right hammers are definitely not the same.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.