OnTarget Sights Posted August 28, 2020 Share Posted August 28, 2020 OnTarget slip on sights are CNC milled from solid brass stock. Take a look at our sights and availability on our website at www.yankmachain.com or contact me at yank@yankmachain.com. Link to comment Share on other sites More sharing options...
Raven Law Dog Posted December 16, 2020 Share Posted December 16, 2020 Howdy, I see on your web that you're out of Pietta and Uberti. Are you going to get anymore in? Link to comment Share on other sites More sharing options...
Yohan Posted January 7, 2021 Share Posted January 7, 2021 I wish I had found these sooner Link to comment Share on other sites More sharing options...
Silver Creek Jack Posted January 13, 2021 Share Posted January 13, 2021 After these are installed and need to be resighted, do you just file them down to point of impact as with a regular sight? Thanks- SCJ Link to comment Share on other sites More sharing options...
Captain Bill Burt Posted January 31, 2021 Share Posted January 31, 2021 Awesome sights. Shootin Sharyn has them on her Ruger 32 H&R magnums and I have them on my Ruger NM Vaqueros. A little red loctite, a rubber mallet, and you're good to go. Link to comment Share on other sites More sharing options...
Buckshot Bob Posted February 2, 2021 Share Posted February 2, 2021 Put a set of these on a pair of Pietta’s , easy installation . I really like that they encapsulate the entire sight . Don’t think I’ll ever be a professional photographer but here’s some pics . Link to comment Share on other sites More sharing options...
OnTarget Sights Posted February 24, 2021 Author Share Posted February 24, 2021 They look great on them irons! Thanks for helping me out! Yank Link to comment Share on other sites More sharing options...
Buckshot Bob Posted February 24, 2021 Share Posted February 24, 2021 2 hours ago, OnTarget Sights said: They look great on them irons! Thanks for helping me out! Yank Thank you for making a great set of sights , I’m guessing you’re going to sell a few pairs Link to comment Share on other sites More sharing options...
Yohan Posted February 24, 2021 Share Posted February 24, 2021 Yank do you shoot some of the local matches down there with Fast Eddie? Link to comment Share on other sites More sharing options...
OnTarget Sights Posted February 24, 2021 Author Share Posted February 24, 2021 I do. For the most part I try and make Riverbend and Cherokee every month. Usually Fast Eddie is at them all. Link to comment Share on other sites More sharing options...
Captain Bill Burt Posted February 28, 2021 Share Posted February 28, 2021 I was happy to discover that Yank’s sights fit the Ruger Wranglers. I’ll be buying another set next Saturday. Great guy to do business with. Link to comment Share on other sites More sharing options...
OnTarget Sights Posted March 13, 2021 Author Share Posted March 13, 2021 Hey all, OnTarget slip on Pietta sights are now available on yankmachain.com. I've tested them on numerous Pietta's and they are good to go. I so far have not experienced any sight size differences on the Pietta's, but as always, I have a money back guarantee if they do not fit properly on your Pietta SA irons. Link to comment Share on other sites More sharing options...
Buckshot Bob Posted March 13, 2021 Share Posted March 13, 2021 13 minutes ago, OnTarget Sights said: Hey all, OnTarget slip on Pietta sights are now available on yankmachain.com. I've tested them on numerous Pietta's and they are good to go. I so far have not experienced any sight size differences on the Pietta's, but as always, I have a money back guarantee if they do not fit properly on your Pietta SA irons. You couldn’t have asked’ for a better fit on my pair , glad you finally got a satisfactory number of test subjects Link to comment Share on other sites More sharing options...
Fox Creek Stitcher Posted March 18, 2021 Share Posted March 18, 2021 Which ones do I order for a Cimmeron El Malo??? Link to comment Share on other sites More sharing options...
Buckshot Bob Posted March 18, 2021 Share Posted March 18, 2021 It depends if Uberti or Pietta made it . The manufacturer will be on it somewhere Link to comment Share on other sites More sharing options...
Buckshot Bob Posted March 18, 2021 Share Posted March 18, 2021 52 minutes ago, Fox Creek Stitcher said: Which ones do I order for a Cimmeron El Malo??? Cimarron says Pietta, looks like the new version of what I have https://www.cimarron-firearms.com/products/hand-guns/single-actions/frontier-sa/el-malo.html Link to comment Share on other sites More sharing options...
OnTarget Sights Posted March 24, 2021 Author Share Posted March 24, 2021 On 3/18/2021 at 3:14 PM, Fox Creek Stitcher said: Which ones do I order for a Cimmeron El Malo??? It will depend on the height of the site. If you have a caliper, let me know what the height of the sight is. By the looks of the pictures on the internet, I would guess they would be right around .345" tall. We have found that Uberti and Pietta both produced two different sizes of sights. Link to comment Share on other sites More sharing options...
OnTarget Sights Posted April 16, 2021 Author Share Posted April 16, 2021 Finished a new slip on sight design for the Smith and Wesson Model 19. They are available at my store, yankmachain.com. Link to comment Share on other sites More sharing options...
Diamond Jake Posted April 21, 2021 Share Posted April 21, 2021 Do you have sights for Uberti 1873 Win rifles? Link to comment Share on other sites More sharing options...
Texas Lizard Posted April 22, 2021 Share Posted April 22, 2021 Ruger Old Army with 3 inch barrel??? Anything work??? Texas Lizard Link to comment Share on other sites More sharing options...
OnTarget Sights Posted April 26, 2021 Author Share Posted April 26, 2021 On 4/21/2021 at 8:01 AM, Diamond Jake said: Do you have sights for Uberti 1873 Win rifles? They are in the works, I will keep you posted. Link to comment Share on other sites More sharing options...
OnTarget Sights Posted April 26, 2021 Author Share Posted April 26, 2021 On 4/22/2021 at 12:31 AM, Texas Lizard said: Ruger Old Army with 3 inch barrel??? Anything work??? Texas Lizard I believe the Old Army sights are the same as a 45 caliber vaquero. Link to comment Share on other sites More sharing options...
OnTarget Sights Posted May 5, 2021 Author Share Posted May 5, 2021 I will be at the Georgia State Match, May 13-15th. Hope to see you there! Link to comment Share on other sites More sharing options...
Bear Run Butch Posted June 14, 2021 Share Posted June 14, 2021 Thanks OnTarget your customer service is outstanding, I had a hard to fit Uperti Thunderer and OnTarget worked with me until the correct sight was made. No extra charge. If you have a need to see your front sight better contact OnTarget great folks to work with. Thanks Tom Bear Run Butch aka Phil Tamburlin again great job. Link to comment Share on other sites More sharing options...
OnTarget Sights Posted June 15, 2021 Author Share Posted June 15, 2021 Butch, Glad I could help! I learned a few things in the process which is always a plus. Yank Link to comment Share on other sites More sharing options...
OnTarget Sights Posted July 3, 2021 Author Share Posted July 3, 2021 Hello everyone! All OnTarget Sights are 15% off this 4th of July Weekend. Just use code OntargetJuly4th during checkout or use the direct link: https://www.yankmachain.com/discount/OntargetJuly4th Thanks and have a safe and great 4th of July weekend! Yank Link to comment Share on other sites More sharing options...
Amigo Posted July 5, 2021 Share Posted July 5, 2021 On 7/3/2021 at 6:32 AM, OnTarget Sights said: Hello everyone! All OnTarget Sights are 15% off this 4th of July Weekend. Just use code OntargetJuly4th during checkout or use the direct link: https://www.yankmachain.com/discount/OntargetJuly4th Thanks and have a safe and great 4th of July weekend! Yank Didn't see any place to put a code working through the different checkout methods on two different browsers...maybe just my computer??? Had used a third browser without the direct link, but the price was the same, so not sure if that 15% was included or not??? Link to comment Share on other sites More sharing options...
OnTarget Sights Posted July 6, 2021 Author Share Posted July 6, 2021 Amigo, The code I believe had expired when you tried it. I have activated it again through tomorrow the 7th of July. Thanks, Yank Link to comment Share on other sites More sharing options...
Amigo Posted July 6, 2021 Share Posted July 6, 2021 Yank, Thanks for the help...order placed! Link to comment Share on other sites More sharing options...
OnTarget Sights Posted July 6, 2021 Author Share Posted July 6, 2021 Amigo, Your order is going out today. Thanks! Yank Link to comment Share on other sites More sharing options...
OnTarget Sights Posted July 25, 2021 Author Share Posted July 25, 2021 Slip on rifle sights will be available next week! They will slip over the marbles rifle sight with no modification to the existing sight. These sights are .1875 in diameter and milled from Dupont Delrin. I used this sight on my rifle at the match yesterday and everyone who had a chance to look down the barrel bought one! I will post again when they are live on my site. https://www.yankmachain.com Thanks! Yank Link to comment Share on other sites More sharing options...
El Mulo Vaquero, SASS #55942 Posted July 31, 2021 Share Posted July 31, 2021 What a nice product! Exact snug fit. They look great on my old Vaquero's Link to comment Share on other sites More sharing options...
Brushwood Bruce Posted August 4, 2021 Share Posted August 4, 2021 Any chance you have, or can cut, something to fit over the barrel mounted solid blade on an 1873 19” carbine over sized on the height to be filed down to point of aim? Maybe the same for the Pietta 1851 navy cap and ball? Link to comment Share on other sites More sharing options...
OnTarget Sights Posted August 4, 2021 Author Share Posted August 4, 2021 12 hours ago, Brushwood Bruce said: Any chance you have, or can cut, something to fit over the barrel mounted solid blade on an 1873 19” carbine over sized on the height to be filed down to point of aim? Maybe the same for the Pietta 1851 navy cap and ball? The stock Uberti '73 rifle sights don't have a very good surface to adhere a slip on sight. If you have a picture of what you currently have that would be great. I've been toying with the idea of a solid brass front sight for the '73. This would not be a slip on version, but the whole sight. For my cap and ball shooters, I put the following sights on from Track of the Wolf. Link to comment Share on other sites More sharing options...
Brushwood Bruce Posted August 4, 2021 Share Posted August 4, 2021 Here are some pics of the front sight on the carbine(with a little gold paint) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.