Earl Brasse, SASS #3562 Posted August 23, 2020 Share Posted August 23, 2020 For Sale Lyman model 45 Lube-Sizer, Includes case colored ratchet, box & copy of instructions, NO DIES or TOP PUNCHES, (just in the pic as an example) Currently about 3/4 full of the old style semi-soft smokeless lube (believe it to be "Mirror-Lube, "still good) $125 Shipped to you in the USA ****************************************************************************************************************** Lyman Lubesizer dies, used, Fits all models Lyman Lube-sizers also fits RCBS lube-sizers some are "early style no O-ring & some are later style with O-ring. Some have marks in the groove where the set screw tightens up. does not effect function. some may need that touched up a little Most all have old lube in/on them. (when more than 1 of a size they are listed A, B, C, etc) .257 Lyman 4 rows of holes , no O-ring .311 ( A) Lyman 4 rows of holes , with O-ring .311 ( Lyman 4 rows of holes , no O-ring .323 Lyman 4 rows of holes , no O-ring .356 Lyman 4 rows of holes , with O-ring (in tube, clean, excellent) .357 ( A) Lyman 4 rows of holes , no O-ring .357 ( B ) Lyman 4 rows of holes no O-ring .357 ( C ) Lyman 4 rows of holes , no O-ring SOLD to Abilene .358 Lyman 4 rows of holes with O-ring .429 Lyman 4 rows of holes with O-ring SOLD to Abilene .452 Lyman 4 rows of holes , no O-ring .454 Lyman 4 rows of holes with O-ring Price for dies $19 ea shipped in the USA If you buy ONE die. If you buy any more than 2 dies, the additional ones are $16 each IF YOU BUY ANY WITH THE LUBER_SIZER $15 each ************************************************************************************************************************* Top Punches, Lyman USED , Some are flat top & some are round top no difference in function. Some have had their top stem threaded by prior owner, it does not effect function. (in some cases where they stamped the top punch ID number on the top, it no longer has an ID number.) In those cases I have listed the diameter of the top punch, as long as it is smaller than the sizer, & approximately the size you need you're good. Sometimes the numbers were stamped on the edge. Couple of opinions You can customize a top punch for a particular bullet nose, see Google etc. With hard-cast typically a round nose will work for a RNFP without deforming it. Lyman #'s (if present) # (for the add ID), Lyman Number (or "X " if no number), Nose size, Bullet nose Type SP (spire point), FP flat, RN round, SWC semi wadcutter, drilled Yes / No 1 # 418 .247 SP No 2 X .300 SWC RNFP Yes 3 X .315 RN Y 4 X .305 SP Y 5 # 413 .385 SP N 6 #311 .350 RN N 7 #311 .350 RN N 8 #311 .350 RN N 9 X .352 FLAT Y For full wad cutter 10 #311 .350 RN Y 11 X .446 SWC RNFP Y 12 X .422 FLAT Y For full wad cutter 13 #124 .444 RN Y 14 #374 .448 RN N Top punch prices 1 top punch $ 12 shipped in the USA BUY one at $12 & then each additional is $8 If bought with Luber sizer or with a sizer die then $ 8 each ************************************************************************************************************************ Wanted .32 Long Colt Brass, Ammo or bullet molds (note they are not the same as .32 S&W Long / .32 Colt New Police or H&R) Merwin Hulbert parts medium & Large frame, S&W large frame DA top break parts, .299 lube- sizing die, Colt 1903 .32 auto magazine, Colt 1902 Military magazine .38 Automatic, Savage 1907 .32 acp Magazine, Old Ideal black finish reloading tools for shotgun etc. Link to comment Share on other sites More sharing options...
Earl Brasse, SASS #3562 Posted August 24, 2020 Author Share Posted August 24, 2020 btt Link to comment Share on other sites More sharing options...
Abilene, SASS # 27489 Posted August 25, 2020 Share Posted August 25, 2020 Howdy Earl, I will take two of the Lubesizer dies, the .358 and .452. Sending you a PM Thanks, Abilene Link to comment Share on other sites More sharing options...
Earl Brasse, SASS #3562 Posted August 25, 2020 Author Share Posted August 25, 2020 Howdy Abilene, .358 & .452 sold to you , pm with info sent. Link to comment Share on other sites More sharing options...
Earl Brasse, SASS #3562 Posted August 27, 2020 Author Share Posted August 27, 2020 Thanks Abilene, Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.