DeaconKC Posted August 2, 2020 Share Posted August 2, 2020 Okay, question for my next project here. I already have a couple of vintage Colt 1911 slides, so I just hafta build the bottoms, right? So, I have used Caspian frames before and liked them and they have a frame that will work, but Fusion also has a frame that meets everything, but the grip safety comes cut with a .250 radius. In the Handbook, there is no mention of this radius being non-allowed, so would this be legal? The frame is almost $90 less expensive, so it would be nice to save the dollars. Thanks folks Link to comment Share on other sites More sharing options...
Boggus Deal #64218 Posted August 2, 2020 Share Posted August 2, 2020 It would be fine but Les Baer makes one with tangs and is about 100 times the quality of the Fusion. Link to comment Share on other sites More sharing options...
DeaconKC Posted August 3, 2020 Author Share Posted August 3, 2020 Thanks for the answer! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.