Slimy Posted July 2, 2020 Share Posted July 2, 2020 Has anyone had luck using Federal's small pistol magnum primers as replacement for the regular Federal's for CAS 38spl loads? Are they harder and/or hotter? Link to comment Share on other sites More sharing options...
J-BAR #18287 Posted July 2, 2020 Share Posted July 2, 2020 They work fine for both smokeless and blackpowder cartridges. You won’t be able to tell the difference without a chronograph, and then it’s negligible at our target distances. Link to comment Share on other sites More sharing options...
Polecat Joe Posted July 2, 2020 Share Posted July 2, 2020 I've used them and had no issues Link to comment Share on other sites More sharing options...
Marauder SASS #13056 Posted July 2, 2020 Share Posted July 2, 2020 Several shooters have stated that the magnum primers are slightly harder to set off. But they have worked fine for me as I have just a little stronger hammer springs that will work with Winchester as well. Link to comment Share on other sites More sharing options...
Snake-eye, SASS#45097 Posted July 2, 2020 Share Posted July 2, 2020 Used them both interchangeable with no issues in 38 spl. and 32 S&W. Link to comment Share on other sites More sharing options...
Silver Sam, SASS #34718L Posted July 2, 2020 Share Posted July 2, 2020 That's all I use smokeless and BP........... No Problems! Link to comment Share on other sites More sharing options...
Barry Sloe Posted July 2, 2020 Share Posted July 2, 2020 Like everyone else, I'll use either for BP or smokeless. If I have both on the shelf I prefer to use Magnums with BP. BS Link to comment Share on other sites More sharing options...
Colorado Coffinmaker Posted July 2, 2020 Share Posted July 2, 2020 Yep. Been using them for many a Lustrum. The work just fine. I shoot APP. NO PROBLEMS ATALL. Link to comment Share on other sites More sharing options...
Cliff Hanger #3720LR Posted July 2, 2020 Share Posted July 2, 2020 Item of interest concerning Small pistol primers. The size of the primer cups are the same for: Small Pistol primers Small Magnum Pistol primers Small Rifle primers The Small Pistol primers and Small Rifle primers are not harder but thicker material to take the higher pressures of the load charge. Not thicker because of the primer charge. As a commercial reloader, I had to find primers to fill customer orders during the past primer shortages. Read lots of specs on primrs and talked with some representitives of the manufacturers. Small Pistol Magnum pirmers and Small Rifle primers are different only in packaging and price. (pennies) If you consider using Small RIfle primers, read the psecs for yourself. ============== NOTE / WARNING Larger pistol primers and Large Rifle primers ARE NOT interchangable. The size of the primer cups a not the same. Large Rilfe primer cups are deeper and will not set in the case pocket deep enough to go flush or recess in the pocket of pistol cases. Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted July 2, 2020 Share Posted July 2, 2020 I've used the Small Pistol Magnum primers (Federal) for a few light years with NO issues in .32's, .38's, 9mm, etc..... Personally, I don't know if the cup is harder or not but I do know with a multiple of finely tuned pistols and rifle springs, I've experienced NO problems. A few years back, I called both CCI and Federal to ask the question about Magnum primers concerning their difference from standard primers. BOTH companies told me that their pistol Magnum primers were made to have a longer burn time of the flash..... but not necessarily a hotter flash. The longer burn time allowed for a more complete burn of powder. If others have a better knowledge of this, they will chime in and share their wisdom. The 'MATCH' primers are also good to use if you can't find the others. ..........Widder Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted July 2, 2020 Share Posted July 2, 2020 I have used small pistol mag and even small rife primers in SASS loads with no issue and never any FTF. SP mag primers are a good choice for really light loads in cold weather. OLG Link to comment Share on other sites More sharing options...
Mustang Gregg Posted July 2, 2020 Share Posted July 2, 2020 We ALWAYS use magnum pistol primers. They work fine. The chamber pressures for CAS should be at the low end anyhow. Link to comment Share on other sites More sharing options...
Abilene Slim SASS 81783 Posted July 2, 2020 Share Posted July 2, 2020 2 hours ago, Cliff Hanger #3720LR said: Small Pistol Magnum pirmers and Small Rifle primers are different only in packaging and price. (pennies) If you consider using Small RIfle primers, read the psecs for yourself. So will small Pistol Magnum primers will work in Small Rifle primer applications? Or does that pose risks because of higher pressures of larger loads? The reason I ask is I have few Small Rifle primers left for my .30 Carbine loads, but I have plenty of SMP primers. Link to comment Share on other sites More sharing options...
Billy Boots, # 20282 LTG-Regulator Posted July 2, 2020 Share Posted July 2, 2020 ABSOLUTELY, Fed 200 and my favorite GM200M for smokeless and BP. Link to comment Share on other sites More sharing options...
Cliff Hanger #3720LR Posted July 2, 2020 Share Posted July 2, 2020 Abilene Slim, Small Magnum Pistol primers and Small Rifle primers are the same for most manufacturers. (check spec on both before using) The primers come from the same machines and are packages as either depending on production run at the time. Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted July 2, 2020 Share Posted July 2, 2020 1 hour ago, Abilene Slim SASS 81783 said: So will small Pistol Magnum primers will work in Small Rifle primer applications? Or does that pose risks because of higher pressures of larger loads? The reason I ask is I have few Small Rifle primers left for my .30 Carbine loads, but I have plenty of SMP primers. 16 minutes ago, Cliff Hanger #3720LR said: Abilene Slim, Small Magnum Pistol primers and Small Rifle primers are the same for most manufacturers. (check spec on both before using) The primers come from the same machines and are packages as either depending on production run at the time. From my experience and understanding, I think Cliff Hanger is correct. SLIM: Small pistol AND Small pistol Magnum primers will work in Small RIFLE primer applications, BUT...... you will probably not get the rifle load performance with those pistol primers. Small RIFLE primers are concocted to burn a greater volume of powder, AND..... it is possible you could have some punctured primers using the Pistol primers in a rifle application. There are exceptions, one of which is the .454 Casull. There are some load data that recommend using Small Rifle (and/or Small Rifle Magnum) primers in the .454 brass because it was made for small primer sizes. Originally, the .454 was made for Large Pistol primers but somebody quickly discovered the brass would be better and last longer if a small primer pocket was put in the brass and the web of the case built up to help withstand its 'gusto'. ..........Widder Link to comment Share on other sites More sharing options...
Anvil Al #59168 Posted July 2, 2020 Share Posted July 2, 2020 It's all I use. Link to comment Share on other sites More sharing options...
Jackrabbit Joe #414 Posted July 2, 2020 Share Posted July 2, 2020 We use Federal Match Pistol Mag primers. Link to comment Share on other sites More sharing options...
Rye Miles #13621 Posted July 2, 2020 Share Posted July 2, 2020 I’ve used them couldn’t tell a difference! Link to comment Share on other sites More sharing options...
Abilene Slim SASS 81783 Posted July 2, 2020 Share Posted July 2, 2020 1 hour ago, Widder, SASS #59054 said: From my experience and understanding, I think Cliff Hanger is correct. SLIM: Small pistol AND Small pistol Magnum primers will work in Small RIFLE primer applications, BUT...... you will probably not get the rifle load performance with those pistol primers. Small RIFLE primers are concocted to burn a greater volume of powder, AND..... it is possible you could have some punctured primers using the Pistol primers in a rifle application. Thx. I’ve read other forums about pierced primers and possible damage to firing pins, but the warnings seemed to revolve around AR-15s etc. Just the same, I don’t feel like experimenting with my own hardware just yet. Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted July 2, 2020 Share Posted July 2, 2020 2 hours ago, Widder, SASS #59054 said: There are exceptions, one of which is the .454 Casull. There are some load data that recommend using Small Rifle (and/or Small Rifle Magnum) primers in the .454 brass because it was made for small primer sizes. Originally, the .454 was made for Large Pistol primers but somebody quickly discovered the brass would be better and last longer if a small primer pocket was put in the brass and the web of the case built up to help withstand its 'gusto'. ..........Widder In my 'lite'. 454 Casull loads(255gn platted SWC, 9gn of Unique)I use a STD, SP primer. Full loads with H-110 get a magnum SR primer. OLG Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted July 3, 2020 Share Posted July 3, 2020 50 minutes ago, The Original Lumpy Gritz said: In my 'lite'. 454 Casull loads(255gn platted SWC, 9gn of Unique)I use a STD, SP primer. Full loads with H-110 get a magnum SR primer. OLG Lumpy, I also like H110. But LilGun has become my favorite with hot .45 Colt and .454 Casull 'Godzilla' loads. ..........Widder Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted July 3, 2020 Share Posted July 3, 2020 7 minutes ago, Widder, SASS #59054 said: Lumpy, I also like H110. But LilGun has become my favorite with hot .45 Colt and .454 Casull 'Godzilla' loads. ..........Widder H-110 gives higher fps and it's more temperature stable. I found it showed less ES over the crono. Have you chronographed your .454 loads. My favorite load is 31.0gn of H-110 with Sierra 300gn jacketed flat point. OLG Link to comment Share on other sites More sharing options...
Billy Boots, # 20282 LTG-Regulator Posted July 3, 2020 Share Posted July 3, 2020 4 hours ago, Widder, SASS #59054 said: There are exceptions, one of which is the .454 Casull. There are some load data that recommend using Small Rifle (and/or Small Rifle Magnum) primers in the .454 brass because it was made for small primer sizes. Originally, the .454 was made for Large Pistol primers but somebody quickly discovered the brass would be better and last longer if a small primer pocket was put in the brass and the web of the case built up to help withstand its 'gusto'. ..........Widder Exactly....When one drives 260 grain heavy jacketed bullets (not full jacket) at near 2000 fps there is MUCH cup pressure thus the need for the small primer pocket and small rifle primer. I use Remington 7 1/2 Small Rifle Bench Rest primers to ignite a healthy load of H-110. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.