Jump to content
SASS Wire Forum

Recommended Posts

Beautiful skb 200e with 26" barrels, could not bring myself to cut them down. Auto ejectors changed to extractors. Top lever is bent left a bit for easier opening. Mouth of barrels very slightly beveled for easier shell insertion.  Shoots very nice and opens and closes with ease. Will email more pics upon request. $1750 shipped to ffl.

1.jpg

2.jpg

3.jpg

4.jpg

5.jpg

 

7.jpg

9.jpg

10.jpg

11.jpg

12.jpg

13.jpg

14.jpg

Link to comment
Share on other sites

Better sell it to GW Wade...he needs all the help he can get....and then some...

Link to comment
Share on other sites

Maybe you could open the action and show everyone what work was performed on it , the bottom of the barrels also .Pictures are worth more than the writing on the wall . Just saying , Splitthumb    

Link to comment
Share on other sites

Opening the action will not show much as skb springs are kind of hidden under cocking levers and any stoning to smooth out anything was done but really not very necessary, cannot really even see that.

Link to comment
Share on other sites

On 6/27/2020 at 7:03 AM, MBFields said:

Opening the action will not show much as skb springs are kind of hidden under cocking levers and any stoning to smooth out anything was done but really not very necessary,

It will show the locking lugs configuration and whether its a single or double lug.

It appears to be double lug, but it’s hard to verify.

Some of  us might want to know:)

Link to comment
Share on other sites

In the open picture you can see that it is double lug if you enlarge it, but I will take a better picture with the barrel's off. Thanks.

Link to comment
Share on other sites

That is sure pretty.

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.