Arkansas Harper SASS #33169 Posted June 17, 2020 Share Posted June 17, 2020 what are your recommendations for acquiring shotgun, rifle and pistol targets? Minimum size would be at least 20". Shotgun targets would be knockdown. I am looking to set up three stages, so would want 12 shotgun, 12 rifle and pistol. Everything that I google comes up smaller, so help me out. Thanks Arkansasharper 33169 Link to comment Share on other sites More sharing options...
Marshal Mo Hare, SASS #45984 Posted June 18, 2020 Share Posted June 18, 2020 Consider a pair of shotgun poppers Link to comment Share on other sites More sharing options...
Cold Lake Kid, SASS # 51474 Posted June 18, 2020 Share Posted June 18, 2020 While we have knock-down shotgun target, our posses also uses "Swinging" shotgun targets. Saves having to reset the knockdowns. Cheaper and quicker to make up, set-up and maintain. You can see two in the centre of the photo, the grey bell shaped targets on the range floor. Link to comment Share on other sites More sharing options...
Michigan Slim Posted June 18, 2020 Share Posted June 18, 2020 Find some used disc plates fr a farmer. Good for all of the above and really tough steel. Link to comment Share on other sites More sharing options...
Sedalia Dave Posted June 18, 2020 Share Posted June 18, 2020 See if you can find a company near you that armors private vehicles. Next option is to talk to a steel supplier and see what they will charge to order you sheets of AR-500 steel and cut it into squares of your desired size. Find out the dimensions of the raw plates and come up with a layout that makes the best use with the fewest cuts. For example a 4X8 sheet works best cut into 16" squares yielding 12 targets per sheet. Link to comment Share on other sites More sharing options...
Cat Brules Posted June 18, 2020 Share Posted June 18, 2020 What various size targets for each stage do you recommend? Cat Brules Link to comment Share on other sites More sharing options...
Sarge Posted June 18, 2020 Share Posted June 18, 2020 Are you looking for home range or for a club? What are you going to be shooting at them with? If just lead at Cowboy velocity, you don't need AR plate. I go to local steel suppliers. Often they have pieces they refer to as "drops." These are pieces cut out of other projects and would be scrap. I like 3/8" but will use 1/4" if it's a good deal. Right now I have a set of 1/4" X 16" round steel plates that have been in use for 4 years. I just added a set of 16" square plates. I use smaller plates swinging on hooks that allow them to reset as shotgun knockdowns. This is for a home range only. I would go with the AR plate if you are going to be setting up a range that is going to take more use than a home range. Link to comment Share on other sites More sharing options...
Assassin Posted June 18, 2020 Share Posted June 18, 2020 Squares, diamonds, and rectangles don't waste material. Fancy shapes take more material with less target area. Large targets will cup and need to be pressed flat or turned over occasionally. 16 x 16 squares are what I'd consider the ultimate size. They can be cut evenly out of a 4 x 4 or 4x 8 sheet of steel. And, they don't cup. I use AR500. All of our targets are cut on a plasma table. Buy once cry once. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.