FOUND / WTB .44 Magnum dies & brass

[Cheatin Charlie 330]

I am looking for dies and brass for loading .44 Remington magnum cartridges.  

Let me know what you have and price.

Thanks Charlie

[The Original Lumpy Gritz 7,185]

You using a single stage or progressive press?

The die sets are a bit different. 

OLG 

[Prairie Dawg, SASS #50329 1,620]

I'll look & see what I have.

I'm sure I have what you need.

--Dawg

[Prairie Dawg, SASS #50329 1,620]

Hi Charlie:

I found a lightly used Dillon set of carbide dies.

I have yet to find the brass, but I still have 1 more place to look.

--Dawg

[Cheatin Charlie 330]

1 hour ago, The Original Lumpy Gritz said:

You using a single stage or progressive press?

The die sets are a bit different. 

OLG 

Single Stage

[Cheatin Charlie 330]

1 hour ago, Prairie Dawg, SASS #50329 said:

Hi Charlie:

I found a lightly used Dillon set of carbide dies.

I have yet to find the brass, but I still have 1 more place to look.

--Dawg

Dawg will they work in a single stage press?

[Pugilist sass1006 14]

I have a bunch of 44 mag brass if you still need it.

P

[The Original Lumpy Gritz 7,185]

6 hours ago, Cheatin Charlie said:

Dawg will they work in a single stage press?

No

There's no dedicated expander die.

OLG 

[Mudflat Mike, SASS #20904 177]

I've got an RCBS steel 3 die 44 mag set with a shell holder for $20.00

I've got a Dillon single  Carbide sizer die for $30.00

Plus shipping

[Big Hand Zack 12]

7 hours ago, Cheatin Charlie said:

Dawg will they work in a single stage press?

 

45 minutes ago, The Original Lumpy Gritz said:

No

There's no dedicated expander die.

OLG 

To be clear.... the dies will work. You’ll just need to buy an expander die, which you can get off midway or Midsouth relatively cheap. 
 

I use the same exact dies in my Dillon or on my Turret press, just gotta make sure you have the necessary reloading steps done

[The Original Lumpy Gritz 7,185]

1 hour ago, Big Hand Zack said:

 

To be clear.... the dies will work. You’ll just need to buy an expander die, which you can get off midway or Midsouth relatively cheap. 
 

I use the same exact dies in my Dillon or on my Turret press, just gotta make sure you have the necessary reloading steps done

 

You need the expander and the die body. 

OLG 

[Cheatin Charlie 330]

1 hour ago, Mudflat Mike, SASS #20904 said:

I've got an RCBS steel 3 die 44 mag set with a shell holder for $20.00

I've got a Dillon single  Carbide sizer die for $30.00

Plus shipping

Mike I will buy your RCBS dies for $20 PM your address and final cost with shipping.

Thanks Charlie

[Mudflat Mike, SASS #20904 177]

PM sent

[Cheatin Charlie 330]

9 hours ago, Pugilist sass1006 said:

I have a bunch of 44 mag brass if you still need it.

P

 

pm sent

[Big Hand Zack 12]

1 hour ago, The Original Lumpy Gritz said:

 

You need the expander and the die body. 

OLG 

I meant a non-Dillon expander die. Like just a plain Jane RCBS expander die or something. I should have made that more clear lol

[Laramie 198]

Hi, Charlie. I have three or four hundred pieces of brass. If you want the let me know and I'll bring the to the next match

 

 

Laramie Leadslinger

[Cheatin Charlie 330]

5 hours ago, Laramie said:

Hi, Charlie. I have three or four hundred pieces of brass. If you want the let me know and I'll bring the to the next match

 

 

Laramie Leadslinger

PM sent

[I. M. Crossdraw, SASS# 8321 66]

If you need 44 special brass, I have about  over a thousand of brass.  I have Dillon dies too, you will still need an expander die. (I think its 44 mag dies, but only I set it up to be 44 special in my press). 

[Cheatin Charlie 330]

6 hours ago, I. M. Crossdraw, SASS# 8321 said:

If you need 44 special brass, I have about  over a thousand of brass.  I have Dillon dies too, you will still need an expander die. (I think its 44 mag dies, but only I set it up to be 44 special in my press). 

Thanks Crossdraw but I only need a small amount of 44 mag for a rifle I have I have dies coming.