Jump to content
SASS Wire Forum

FOUND / WTB .44 Magnum dies & brass


Recommended Posts

Hi Charlie:

I found a lightly used Dillon set of carbide dies.

I have yet to find the brass, but I still have 1 more place to look.

--Dawg

Link to comment
Share on other sites

1 hour ago, Prairie Dawg, SASS #50329 said:

Hi Charlie:

I found a lightly used Dillon set of carbide dies.

I have yet to find the brass, but I still have 1 more place to look.

--Dawg

Dawg will they work in a single stage press?

Link to comment
Share on other sites

7 hours ago, Cheatin Charlie said:

Dawg will they work in a single stage press?

 

45 minutes ago, The Original Lumpy Gritz said:

No

There's no dedicated expander die.

OLG 


To be clear.... the dies will work. You’ll just need to buy an expander die, which you can get off midway or Midsouth relatively cheap. 
 

I use the same exact dies in my Dillon or on my Turret press, just gotta make sure you have the necessary reloading steps done

Link to comment
Share on other sites

1 hour ago, Big Hand Zack said:

 


To be clear.... the dies will work. You’ll just need to buy an expander die, which you can get off midway or Midsouth relatively cheap. 
 

I use the same exact dies in my Dillon or on my Turret press, just gotta make sure you have the necessary reloading steps done

 

You need the expander and the die body. ;)

OLG 

Link to comment
Share on other sites

1 hour ago, Mudflat Mike, SASS #20904 said:

I've got an RCBS steel 3 die 44 mag set with a shell holder for $20.00

I've got a Dillon single  Carbide sizer die for $30.00

Plus shipping

Mike I will buy your RCBS dies for $20 PM your address and final cost with shipping.

Thanks Charlie

Link to comment
Share on other sites

1 hour ago, The Original Lumpy Gritz said:

 

You need the expander and the die body. ;)

OLG 


I meant a non-Dillon expander die. Like just a plain Jane RCBS expander die or something. I should have made that more clear lol

Link to comment
Share on other sites

Hi, Charlie. I have three or four hundred pieces of brass. If you want the let me know and I'll bring the to the next match

 

 

Laramie Leadslinger

Link to comment
Share on other sites

If you need 44 special brass, I have about  over a thousand of brass.  I have Dillon dies too, you will still need an expander die. (I think its 44 mag dies, but only I set it up to be 44 special in my press). 

Link to comment
Share on other sites

6 hours ago, I. M. Crossdraw, SASS# 8321 said:

If you need 44 special brass, I have about  over a thousand of brass.  I have Dillon dies too, you will still need an expander die. (I think its 44 mag dies, but only I set it up to be 44 special in my press). 

Thanks Crossdraw but I only need a small amount of 44 mag for a rifle I have I have dies coming.

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.