Jump to content
SASS Wire Forum

SKB Royal Light replacement part.


Keelhaul

Recommended Posts

I was wondering if anyone could help a pard out with a part. I was told by a very reputable source I could get the part I need but I can't quite find it. Its the right cooking lever for a skb royal light. The one was cracked and then repaired before I owned it, but now its really broken. Luckily it still functions but I want to get it fixed asap. So if someone could post a link to the specific part that would help me out, or steer me in the right direction. 

20200516_194227.jpg

Link to comment
Share on other sites

This is your best source for SKB SxS Parts............... IF they're available.

https://www.skbshotguns.com/parts-tools/japan/side-x-side/12-ga-parts

And their customer service folks are Very Helpful too !!!

 

Surprisingly enough, Many SKB parts are available on.......  ebay ........ of all places :o

People Buy Em,  Strip Em and sell the parts on ebay.... I've found several impossible to find parts there before when all other sources were Dry.

 

I'm pretty sure your Royal cocking lever is the same as the ones on a 100....... Good Luck!!

Link to comment
Share on other sites

1 minute ago, Goody, SASS #26190 said:

I checked here, but they do not show to have the cocking levers. Might call them though.

 

https://www.skbshotguns.com/parts-tools/japan/side-x-side

 

There has been a couple of times when I needed something that showed NA and I called em...  and Sure Nuff they found one... Worth a Shot!!

Link to comment
Share on other sites

Late again, Sam!

 

Keelhaul,

I would think that if you are unable to source a new one that a competent machinist could weld and reshape your current one. 

 

Link to comment
Share on other sites

Late is My Middle Name :P

 

And for ONCE I agree with Goody....... I betcha that Lever is repairable !!!

Link to comment
Share on other sites

Try getting hold of Johnny Meadows or Doc Noper. They are two of the best SKB smiths around. Might be possible they would have the part or know where to get one

Link to comment
Share on other sites

I had a major repair issue with one of my SKBs and unfortunately, it was work that wasn't available from our top cowboy gunsmiths.  In desperation, I called

https://www.skbshotguns.com/parts-tools/japan/side-x-side  they recommended their go-to gunsmith.  He wasn't cheap, but he does excellent work and my favorite SKB is "cured".  His contact info is listed below.

 

Mitch Schultz

Gunsmithing LTD

3 Lacey PL

Southport, CT 06890

(203) 254-0436

 

They didn't do email when I used them last. 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.