Jump to content
SASS Wire Forum

WIthdrawn


Recommended Posts

Do you have the original parts that were removed, such as hammers, springs, etc.?

 

Have the hammer mainsprings been filed down....will you post a photo of the mainsprings?

 

Are the plastic grips “dinged,” cracked, chipped, or otherwise damaged anywhere, inside or outside?

 

Is there any corrosion anywhere on these guns?

 

Are the cylinder chambers completely clean, shiny and unpitted throughout?

 

Are the bores completely clean, shiny and unpitted throughout?

 

Are all the screws original to these guns?   Are any screws missing?

 

Cat Brules

Link to comment
Share on other sites

I understood work was done.  The main thing I didn’t understand (which you clarified) was the hammers.....I thought they had been switched out, not modified.  Also, I was concerned that shooting blanks might have led to acceleration of pitting in the chambers and bores, not so, as you clarified.  You clarified everything very well.  


These look like a great set of USFA Rodeos!!  
I’m interested in the guns, however I would want unmodified hammers.

 

I shoot Rodeos myself and I was looking to these as a second set.

 

Best regards,

Cat Brules 

Link to comment
Share on other sites

  • 3 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.