General Ledger Posted March 28, 2020 Share Posted March 28, 2020 So, due to Covid 19 I'm catching up on alot of reloading. I've used VV N 320 for YEARS-loading .38 & .357. I love my loads. However, I've also got 2 containers of VV N310 I used in another shooting sport. My question is this: if I want to switch to N 310 are there any suggestions as to powder charges. I don't want to experiment until I know some specifics. I seem to recall that we're not permitted to share specific load recipes on the wire, so if that's still the case, please feel free to e-mail me or PM me. Thanks! Stay safe & stay well General Ledger Link to comment Share on other sites More sharing options...
Tyrel Cody Posted March 28, 2020 Share Posted March 28, 2020 The no load restriction was lifted: Link to comment Share on other sites More sharing options...
doc roy l. pain Posted March 28, 2020 Share Posted March 28, 2020 I’ve never ran it in 38 special but I know several people that run it in 38 short colt and in 32’s. Link to comment Share on other sites More sharing options...
August West, SASS #45079 Posted March 28, 2020 Share Posted March 28, 2020 I've been running 3.3 grains of VV310 behind a 105 Badman Bullet for the past few years. I use the SAME charge in .38 and .357 cases. I've had no problems with primers backing out at that intensity, but it is on the light side of 'normal' for sure. 310 burns so much cleaner and more completely than 320. I predict you'll not go back. Link to comment Share on other sites More sharing options...
Samuel B Carpenter Posted March 28, 2020 Share Posted March 28, 2020 Yepp, N 310 in 38 is one of the better choices I load 105 and 125 grain bullets and use 3,0 - 3,5 grain powder my cas load is 125 over 3,5 grain N 310 Hope this helps your choises regards Samuel B Link to comment Share on other sites More sharing options...
Desert Pete SASS #42168 Posted March 28, 2020 Share Posted March 28, 2020 VV lists load data on their web site. Link to comment Share on other sites More sharing options...
General Ledger Posted March 28, 2020 Author Share Posted March 28, 2020 Thanks guys. This gives me some starting points/loads GL Link to comment Share on other sites More sharing options...
General Ledger Posted March 28, 2020 Author Share Posted March 28, 2020 P.S.-the Vithavouri website didn't have .38 load specs for N310 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.