Sedalia Dave Posted April 3, 2020 Share Posted April 3, 2020 2 hours ago, RMW said: Are you trying to just trying to get it to spec ? Or are you setting up the mec to give it a little extra squeeze I remember when I got my size master years ago you had to initially adjust the collet sizer and if I remember right you could give it a pretty good squeeze Just squeeze them enough so that they drop into my case gauge. No need to over do it. Link to comment Share on other sites More sharing options...
Cemetery Posted April 4, 2020 Share Posted April 4, 2020 7 hours ago, The Original Lumpy Gritz said: When did you last do a deep cleaning of the bolt, action etc? Just what is the extraction issue? OLG Last deep clean was this past fall. It's not pulling out empty shells. So if it falls to pull out the first one, well, I get a bunch of SG misses. Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted April 4, 2020 Share Posted April 4, 2020 17 minutes ago, Cemetery said: Last deep clean was this past fall. It's not pulling out empty shells. So if it falls to pull out the first one, well, I get a bunch of SG misses. Stiffer spring for left side extractor then. Polish the chamber. OLG Link to comment Share on other sites More sharing options...
Sedalia Dave Posted April 4, 2020 Share Posted April 4, 2020 19 minutes ago, Cemetery said: Last deep clean was this past fall. It's not pulling out empty shells. So if it falls to pull out the first one, well, I get a bunch of SG misses. Carry a 500 or so grain bullet in with you. With the barrel pointed up but not breaking the 170, drop it down the barrel. 9 times out of 10 it'll knock the hull loose. Link to comment Share on other sites More sharing options...
Painted Mohawk SASS 77785 Posted April 5, 2020 Share Posted April 5, 2020 On 3/28/2020 at 7:20 AM, Sedalia Dave said: +1000000000000000000000000000000000000000000000 As we can't use the '97 in Australia we use a stoked up '87 !!!! Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted April 5, 2020 Share Posted April 5, 2020 10 hours ago, Painted Mohawk SASS 77785 said: As we can't use the '97 in Australia we use a stoked up '87 !!!! WTH, you can't own a pump SG, yet a lever action SG is OK.... OLG Link to comment Share on other sites More sharing options...
Buckshot Bob Posted April 5, 2020 Author Share Posted April 5, 2020 13 minutes ago, The Original Lumpy Gritz said: WTH, you can't own a pump SG, yet a lever action SG is OK.... OLG I guess the gun laws don’t make sense anywhere Link to comment Share on other sites More sharing options...
Buckshot Bob Posted April 5, 2020 Author Share Posted April 5, 2020 11 hours ago, Painted Mohawk SASS 77785 said: As we can't use the '97 in Australia we use a stoked up '87 !!!! That must mean a gun designed in 1887 is the highest capacity gun going in Australia Link to comment Share on other sites More sharing options...
Tom Bullweed Posted April 5, 2020 Share Posted April 5, 2020 Had in original in 12 ga that I used for bp categories for several years. Kind of looking to return to trap shooting one day. The Chiappa long-barrel version is on my short list of guns. It will not be as easy to shoot as a BT-99 but it was the choice of some shooters through the 1930s, when the Browning Superposed became popular. Link to comment Share on other sites More sharing options...
Buckshot Bob Posted April 5, 2020 Author Share Posted April 5, 2020 Tom I plan on killing a few birds with mine this fall Link to comment Share on other sites More sharing options...
Painted Mohawk SASS 77785 Posted April 6, 2020 Share Posted April 6, 2020 10 hours ago, The Original Lumpy Gritz said: WTH, you can't own a pump SG, yet a lever action SG is OK.... OLG Howdy Lumpy....Yeah strange I know !!!.....further we can have punp rifles but no auto's..then you can have an auto shotgun for clays [ with a medical certificate stating you need it for less recoil ]. I have a lovely Rem 1100 ..unfortunately we have to deal with the cards they play.... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.