Barbwire Bill, SASS #661 Posted February 23, 2020 Share Posted February 23, 2020 A buddy of mine got a Chiappa Spencer and is looking for someone to tune it up. Doesn’t anyone specialize in them? Are there any Cowboy Gunsmiths in Calif? thanks BB Link to comment Share on other sites More sharing options...
Three Foot Johnson Posted February 23, 2020 Share Posted February 23, 2020 Nope, nobody specializes in them. I've only seen two people ever shoot one at a match, and I'm one of them. The hammer spring and trigger spring are opposite legs of the same V spring, so ya gotta be real careful about lightening that 15-20 lb trigger pull. Break the sharp edge at the top forward edge of the breech block so it doesn't dig into the next bullet so bad. Just the middle part is what's really important, as the rest of it isn't going to make contact with the bullet - don't radius it, just break the sharp edge. If the whole lever/breech block assembly ever drops clear out the bottom of the action when levering, insert a thin washer as indicated. (Washer is green in middle picture, yellow arrow in last picture shows location. Red arrow points to where the block can slide past the trigger plate tang and fall out.) The screws holding the firing pin slide in place will probably work loose and jam up the breech block, so maybe put a dab of Loctite on them - not too much, or you'll glue it solid to the breech block. Link to comment Share on other sites More sharing options...
Gunner, SASS #1940 Posted February 24, 2020 Share Posted February 24, 2020 Go to CAS City and check out the forum for the Spencer Shooting Society https://www.cascity.com/forumhall/index.php/board,35.0.html?PHPSESSID=3hb3oubus9tu3e3np17ii704e4 You may find help there from some very knowledgeable people. For transparency - I founded SSS. Link to comment Share on other sites More sharing options...
Sagebrush Burns, SASS # 14226 Posted February 27, 2020 Share Posted February 27, 2020 Lonnie at Running Iron in Nebraska is a good hand with Spencers. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.