Dutch Nichols, SASS #6461 Posted February 15, 2020 Share Posted February 15, 2020 The Win/Miroku's have a weird FP set up, unlike the Uberti or so it seems to me? Is there say a 1 pc setup for the Mirokus? I know there is for the Uberti's. Or does the safety catch in the Mirokus preclude that? If there is a 1 pc who sells it? Has anybody listed which parts interchange between the 2? I know a lot can be made to fit but looking for drop ins. My thanks in advance and sorry if this was asked before. Link to comment Share on other sites More sharing options...
El Hombre Sin Nombre Posted February 16, 2020 Share Posted February 16, 2020 I believe pioneer used to make a one piece firing pin. I don’t know if they still do though. I’m also pretty sure nothing at all uberti will fit a Winchester. Link to comment Share on other sites More sharing options...
Assassin Posted February 16, 2020 Share Posted February 16, 2020 Just weld up the firing pin. Link to comment Share on other sites More sharing options...
Tex Jones, SASS 2263 Posted February 16, 2020 Share Posted February 16, 2020 Pioneer will have more " as per their web site. Link to comment Share on other sites More sharing options...
Juan Solo Posted February 16, 2020 Share Posted February 16, 2020 The firing pin on the mirokus is a complete non-issue. The hammer can be set so light that it wont even stay pushed against the firing pin extension when the rifle is held vertically. There is not much to gain via a 1 piece pin in the new winchesters to make it worth the investment. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.