Okiepan Posted January 21, 2020 Share Posted January 21, 2020 So as the title says, What is your favorite flintlock pistol, rifle or musket ? Link to comment Share on other sites More sharing options...
Hardpan Curmudgeon SASS #8967 Posted January 21, 2020 Share Posted January 21, 2020 Gotta be my Ferguson carbine. My son, Sassparilla Kid, with the charcoal burner ~ .62 caliber Link to comment Share on other sites More sharing options...
Hardpan Curmudgeon SASS #8967 Posted January 21, 2020 Share Posted January 21, 2020 And here's the Kid with his Holly built flinter.... By the way ~ note the Kid's buckle. It's a bronze version of the pewter one pictured below. Half-Breed Pete gave that to me about forty years ago. I passed it on to the Kid when he was a teenager and he's worn it pretty much daily for the last fifteen years. Link to comment Share on other sites More sharing options...
Trigger Mike Posted January 21, 2020 Share Posted January 21, 2020 A Harper's ferry in .58 that is also the emblem of the MPs in the army. I bought it used on the wire. Excellent pistol and fun to shoot. My 10 year old loves it to Link to comment Share on other sites More sharing options...
Forty Rod SASS 3935 Posted January 21, 2020 Share Posted January 21, 2020 A classic custom .40 Pennsylvania - Kentucky rifle, made for me by a customer in 1976 when I still worked for Ray and Jackie Taylor at The Flintlock gun shop in Anaheim, CA. It has a 42" swamped barrel, Siler flintlock, compound set triggers, and a maple stock. The barrel was a reworked off the shelf piece that was reshaped and had a hooked breach on it. It has a true full buckhorn rear sight and a steel front sight in a copper base. If I do my job, it will do its job. Not too much figure in the stock and not a lot of metal decorations, but it is an elegant piece, almost "dainty" and a really fine gun to shoot and handle in the field. Weight just under 8 pounds. I don't remember the man's name and he didn't sign the gun. It took over a year to get it and cost me $450.00, a HUGE sum in those days, paid off at $45.00 a month for a year. Link to comment Share on other sites More sharing options...
Yellowhouse Sam # 25171 Posted January 21, 2020 Share Posted January 21, 2020 This one....NC style southern mountain .45 Link to comment Share on other sites More sharing options...
Eyesa Horg Posted January 21, 2020 Share Posted January 21, 2020 Hoping it's going to be the "Issac Haynes" in 54 cal. that I'm building from a Chambers kit. Long way to go yet however! Link to comment Share on other sites More sharing options...
Crazy Gun Barney, SASS #2428 Posted January 21, 2020 Share Posted January 21, 2020 I'm guessing Yellowhouse Sam is a South Paw. Beautiful stock even if it was built backwards! Link to comment Share on other sites More sharing options...
Buffalo Creek Law Dog Posted January 21, 2020 Share Posted January 21, 2020 I have a Pedersoli Kentucky flinter in .50 cal. Link to comment Share on other sites More sharing options...
Cyrus Cassidy #45437 Posted January 21, 2020 Share Posted January 21, 2020 I own a Pedersoli replica of the famous Pennsylvania Long Rifle. It shoots rather well and looks historically authentic. Link to comment Share on other sites More sharing options...
Cyrus Cassidy #45437 Posted January 21, 2020 Share Posted January 21, 2020 1 hour ago, Forty Rod SASS 3935 said: A classic custom .40 Pennsylvania - Kentucky rifle, made for me by a customer in 1976 when I still worked for Ray and Jackie Taylor at The Flintlock gun shop in Anaheim, CA. It has a 42" swamped barrel, Siler flintlock, compound set triggers, and a maple stock. The barrel was a reworked off the shelf piece that was reshaped and had a hooked breach on it. It has a true full buckhorn rear sight and a steel front sight in a copper base. If I do my job, it will do its job. Not too much figure in the stock and not a lot of metal decorations, but it is an elegant piece, almost "dainty" and a really fine gun to shoot and handle in the field. Weight just under 8 pounds. I don't remember the man's name and he didn't sign the gun. It took over a year to get it and cost me $450.00, a HUGE sum in those days, paid off at $45.00 a month for a year. Rod, what is a swamped barrel? Link to comment Share on other sites More sharing options...
Tyrel Cody Posted January 21, 2020 Share Posted January 21, 2020 9 minutes ago, Cyrus Cassidy #45437 said: Rod, what is a swamped barrel? A barrel that is wider at the breech and muzzle than it is in the middle; helps reduce weight and balance better: Link to comment Share on other sites More sharing options...
Marshal Hangtree Posted January 21, 2020 Share Posted January 21, 2020 3 hours ago, Yellowhouse Sam # 25171 said: This one....NC style southern mountain .45 Beautiful rifle, Sam! Since I shoot all long arms lefty style, I've always wanted a nice left handed flinter. Dixie used to sell a left handed Tennessee rifle in .36 cal., and I think they still do. But even the kit guns are out of my ball park price wise. Link to comment Share on other sites More sharing options...
Henry T Harrison Posted January 21, 2020 Share Posted January 21, 2020 How about a used to was flintlock. This was an 1814 Harpers Ferry Musket. It was converted to percussion by the Deringer process and cut down. It was common for the south to cut them back for Cavalry use but there is no guarantee this one was. It’s light short and perfectly balanced Link to comment Share on other sites More sharing options...
Michigan Slim Posted January 22, 2020 Share Posted January 22, 2020 11 hours ago, Crazy Gun Barney, SASS #2428 said: I'm guessing Yellowhouse Sam is a South Paw. Beautiful stock even if it was built backwards! Hey! I resemble that remark! I don't shoot flinters cause I'm a lefty. All that flash right between my eyes will give a guy a flinch! And I'm not buyin no more lefty guns. Link to comment Share on other sites More sharing options...
Forty Rod SASS 3935 Posted January 22, 2020 Share Posted January 22, 2020 10 hours ago, Cyrus Cassidy #45437 said: Rod, what is a swamped barrel? It's an octagonal barrel, never seen nor heard of it being done to a round barrel. Starts out at one dimension, gets narrower as it approaches the muzzle, then gets a bit larger the last 10-12inches. The muzzle is always smaller than the breach but larger than the narrowest portion. The bore is the same all the way unlike a blunderbus. Mine was a 66 even twist with seven lands and grooves bore, but I've seen a few that had a gain twist. Much more money and I never saw any benefit in the hands of most shooters. It reduces weight some and just looks amazingly good. Sort of "gracefuls" the whole thing up. It also increases the cost a bunch. Link to comment Share on other sites More sharing options...
Three Foot Johnson Posted January 22, 2020 Share Posted January 22, 2020 I'm a little short on flintlocks - two Lyman GPR'S .50 & .54, a T/C Hawken .50, a Traditions "Shenandoah" .50, and a .45 CVA pistol I built from a kit about 50 years ago. The Lyman GPR's are definitely better rifles than the T/C and the Traditions. Link to comment Share on other sites More sharing options...
Yellowhouse Sam # 25171 Posted January 22, 2020 Share Posted January 22, 2020 10 hours ago, Michigan Slim said: Hey! I resemble that remark! I don't shoot flinters cause I'm a lefty. All that flash right between my eyes will give a guy a flinch! And I'm not buyin no more lefty guns. I have friends that thrive on wrong handed rifles. One in particular who is a righty just makes sure his left eye is shut and he doesn't even notice the flash off the Siler lock. In fact, he shoots mine as good as his own custom made rifle Link to comment Share on other sites More sharing options...
Yellowhouse Sam # 25171 Posted January 22, 2020 Share Posted January 22, 2020 18 hours ago, Marshal Hangtree said: Beautiful rifle, Sam! Since I shoot all long arms lefty style, I've always wanted a nice left handed flinter. Dixie used to sell a left handed Tennessee rifle in .36 cal., and I think they still do. But even the kit guns are out of my ball park price wise. Take a look at Kibler https://kiblerslongrifles.com/collections/rifle-kit rifles and kits......IMHO the hands down best choice for first time builder or any except the master builders. Link to comment Share on other sites More sharing options...
Marshal Hangtree Posted January 22, 2020 Share Posted January 22, 2020 29 minutes ago, Yellowhouse Sam # 25171 said: Take a look at Kibler https://kiblerslongrifles.com/collections/rifle-kit rifles and kits......IMHO the hands down best choice for first time builder or any except the master builders. Thanks, Sam. These kits look great, and the prices are very reasonable. Unfortunately, they don't offer left-handed versions yet. Link to comment Share on other sites More sharing options...
Dude Slade Posted January 22, 2020 Share Posted January 22, 2020 This Early Lancaster rifle in .54 that I built from Chambers parts: Link to comment Share on other sites More sharing options...
Tyrel Cody Posted January 22, 2020 Share Posted January 22, 2020 3 hours ago, Marshal Hangtree said: Thanks, Sam. These kits look great, and the prices are very reasonable. Unfortunately, they don't offer left-handed versions yet. YET, but Jim is now making his own locks and has stated left handed kits will be coming soon. Link to comment Share on other sites More sharing options...
Marshal Hangtree Posted January 22, 2020 Share Posted January 22, 2020 11 minutes ago, Tyrel Cody said: YET, but Jim is now making his own locks and has stated left handed kits will be coming soon. Looking forward to that! Link to comment Share on other sites More sharing options...
Muley Gil SASS # 57795 Posted January 22, 2020 Share Posted January 22, 2020 22 hours ago, Henry T Harrison said: How about a used to was flintlock. This was an 1814 Harpers Ferry Musket. It was converted to percussion by the Deringer process and cut down. It was common for the south to cut them back for Cavalry use but there is no guarantee this one was. It’s light short and perfectly balanced That looks like a Common Rifle patchbox. Link to comment Share on other sites More sharing options...
Badger Mountain Charlie SASS #43172 Posted January 22, 2020 Share Posted January 22, 2020 DROOL. Love the lines of a Kentucky Flinter. Link to comment Share on other sites More sharing options...
St. Louis Suomi SASS #31905 Posted January 23, 2020 Share Posted January 23, 2020 Howdy: I have a Pedersoli Blue Ridge Mountain rifle in .36 cal flintlock - a real dandy to shoot. And I have a Investarms .58 cal Hawken flintlock from Cabelas and it is a very good deer stopper. I intend to keep both of those til I leave earth. STL Suomi Link to comment Share on other sites More sharing options...
Forty Rod SASS 3935 Posted January 23, 2020 Share Posted January 23, 2020 23 hours ago, Three Foot Johnson said: I'm a little short on flintlocks - two Lyman GPR'S .50 & .54, a T/C Hawken .50, a Traditions "Shenandoah" .50, and a .45 CVA pistol I built from a kit about years ago. The Lyman GPR's are definitely better rifles than the T/C and the Traditions. I bought a .50 GPR percussion when they first came out back in the mid 70s. (I worked in a black powder shop in Anaheim and got the first one through our door.) It's my favorite BP rifle and shoots right on the mark with 75 gr. Goex FFFg and a 490round ball with a cotton tee shirt patch and some moose juice lube that a friend brewed up. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.