Brimstone Bill Willson Posted November 25, 2019 Share Posted November 25, 2019 I found these Kent low recoil 2 1/2" shells a few months ago and they worked great! They shucked out of my honed '78 Cimarron. Another bonus is, being 2.5", they let you hold an extra shell in a five round tube magazine, so good for '97's in Wild Bunch. They are less expensive as well. https://kentcartridge.com/us/shotshell/elite-low-recoil-training Link to comment Share on other sites More sharing options...
Major Crimes Posted November 25, 2019 Share Posted November 25, 2019 Not sure if you can get these over in the USA (there would be a change we have something you dont). I haven't tried them yet but am getting a brick this weekend. https://ontargetsportingarms.com/product/falcon-saloon-western-action-12ga/ Link to comment Share on other sites More sharing options...
Warden Callaway Posted November 25, 2019 Share Posted November 25, 2019 They look like my reloads with the rolled crimp. Should run better in 87s, I'd say. Link to comment Share on other sites More sharing options...
Equanimous Phil Posted November 25, 2019 Share Posted November 25, 2019 1 hour ago, Major Crimes said: Not sure if you can get these over in the USA Same with these. It's what most pards shoot over here. Shotshells by a Polish company called Pionki, also availabe with BP: http://fam-pionki.pl/media/upload/files/Katalog- specjalnej-FAM-ang_.pdf Link to comment Share on other sites More sharing options...
Eyesa Horg Posted November 25, 2019 Share Posted November 25, 2019 5 hours ago, Major Crimes said: Not sure if you can get these over in the USA (there would be a change we have something you dont). I haven't tried them yet but am getting a brick this weekend. https://ontargetsportingarms.com/product/falcon-saloon-western-action-12ga/ Cool style points there! Link to comment Share on other sites More sharing options...
Painted Mohawk SASS 77785 Posted November 26, 2019 Share Posted November 26, 2019 22 hours ago, Major Crimes said: Not sure if you can get these over in the USA (there would be a change we have something you dont). I haven't tried them yet but am getting a brick this weekend. https://ontargetsportingarms.com/product/falcon-saloon-western-action-12ga/ 940 fps, #7 1 / 2,made in New Zealand. I like to use my own reloads but a lot of Aus cowboys are trying them, they retail here for around $ 95-100 per 250 slab. Link to comment Share on other sites More sharing options...
Roscoe Regulator Posted November 26, 2019 Share Posted November 26, 2019 The question after how well they shuck is always how many reloads you can get from the hulls. Link to comment Share on other sites More sharing options...
Painted Mohawk SASS 77785 Posted November 26, 2019 Share Posted November 26, 2019 The question after how well they shuck is always how many reloads you can get from the hulls. Actually that is a good point..the Saloon Cowboy loads that are made in NZ come out easily but the roll crimp cases are not the in the best condition after being fired so reloading probably wouldn't happen, so it does make them expensive to buy..not like the older Winchester taper crimped cases that I have reloaded up to 10 times for some before they are a throw away..JMO Link to comment Share on other sites More sharing options...
Charlie MacNeil, SASS #48580 Posted November 28, 2019 Share Posted November 28, 2019 Actually that is a good point..the Saloon Cowboy loads that are made in NZ come out easily but the roll crimp cases are not the in the best condition after being fired so reloading probably wouldn't happen, so it does make them expensive to buy..not like the older Winchester taper crimped cases that I have reloaded up to 10 times for some before they are a throw away..JMO What about redoing the roll crimp? I’ve done some homemade roll crimped shells in the past that I was able to load several times. I’ve got an antique Bridgeport roll crimper that I found on eBay a number of years ago that I use when I want to go to that much work to load shotgun shells... Link to comment Share on other sites More sharing options...
Johnson County Mike Posted November 28, 2019 Share Posted November 28, 2019 Hi, It's a long ride to Australia . I'm wondering how the 2 1/2" shells feed? I found these but currently "out of stock", regards, Mike https://www.targetsportsusa.com/fiocchi-shooting-dynamics-light-clay-target-12-gauge-2-34-1oz-9-shot-ammunition-p-3003.aspx?keyword=fiocchi shooting dynamics light clay Link to comment Share on other sites More sharing options...
Roscoe Regulator Posted November 28, 2019 Share Posted November 28, 2019 Hi, It's a long ride to Australia . I'm wondering how the 2 1/2" shells feed? I found these but currently "out of stock", regards, Mike https://www.targetsportsusa.com/fiocchi-shooting-dynamics-light-clay-target-12-gauge-2-34-1oz-9-shot-ammunition-p-3003.aspx?keyword=fiocchi shooting dynamics light clay It is a different shell, Fiocchi's light target, 7/8, #8, but a case I am working through shows the hulls only good for one or two reloads, and then the crimp petals break apart. They are 6 point crimp. It feels to me like the plastic is more brittle than some Win AA I used for comparison. Price is good but not so much when counting number of reloads. There simply are no others I have found other than Remington and Winchester with smooth hulls favored for fast and reliable shucking and which will last through several reloadings. Fiocchis are ribbed, but I have had only one "hull!" call so far. Link to comment Share on other sites More sharing options...
Doc Hurd #12379 Posted November 29, 2019 Share Posted November 29, 2019 Link to comment Share on other sites More sharing options...
Johnson County Mike Posted November 29, 2019 Share Posted November 29, 2019 It is a different shell, Fiocchi's light target, 7/8, #8, but a case I am working through shows the hulls only good for one or two reloads, and then the crimp petals break apart. They are 6 point crimp. It feels to me like the plastic is more brittle than some Win AA I used for comparison. Price is good but not so much when counting number of reloads. There simply are no others I have found other than Remington and Winchester with smooth hulls favored for fast and reliable shucking and which will last through several reloadings. Fiocchis are ribbed, but I have had only one "hull!" call so far. Hi, Thanks for the info. I don't reload shotgun as I have my hands full with pistol and rifle. Are you saying the smooth hulls are more reliable in "shucking"? I have not tried the Fiocchi's so I may have to go to a different load. I have been using Remington up till now, regards, Mike Link to comment Share on other sites More sharing options...
Johnson County Mike Posted November 29, 2019 Share Posted November 29, 2019 Hi, Brownells has these at $7.29 with a coupon, regards, Mike https://www.brownells.com/ammunition/shotgun-ammo/top-gun-subsonic-12-gauge-2-3-4-ammo-prod120278.aspx?avs|Cartridge_1=AEE_12+Gauge&avs|Length_1=2%2b3zz1zz4%22&avs|Manufacturer_1=federal Link to comment Share on other sites More sharing options...
Doc Hurd #12379 Posted November 29, 2019 Share Posted November 29, 2019 Thanks Mike! Link to comment Share on other sites More sharing options...
Painted Mohawk SASS 77785 Posted November 29, 2019 Share Posted November 29, 2019 What about redoing the roll crimp? I’ve done some homemade roll crimped shells in the past that I was able to load several times. I’ve got an antique Bridgeport roll crimper that I found on eBay a number of years ago that I use when I want to go to that much work to load shotgun shells... Yep roll crimping again wouldn't be a problem if that's what you wanted to do, although in saying that these Falcon Cowboy loads from NZ really mush up the ends after firing. I tend to only do it the once as there are plenty of hulls around....I was more so saying that buying crimped cases are better value if they are the ones that can be reloaded many times..which is getting harder as the quality of the two piece hulls nowadays is not the best.Earlier one piece hulls like the tapered Winchester were great for many reloads. Link to comment Share on other sites More sharing options...
watab kid Posted November 29, 2019 Share Posted November 29, 2019 hmmm , seems there is stuff out there i cannot find , wish they shipped this side of the pond , i do have a bunch of those 2 1/2" round , but they are not the light loads you all are talking of , these are rounds that michael macintosh shot birds with in south america , given to me by his stepson who is a friend of mine , ive been reluctant to use them in cowboy as i think them to be full power loads - i like the idea of "low recoil" not sure these fit that ..........maybe i need to try a few to see , Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.