Jump to content
SASS Wire Forum

Feather light Shotgun load data


Recommended Posts

I have been using a fairly new powder by Alliant called Extra Lite.  I am about out of it and seem to be having trouble finding it.  What other recipes or powders are good to make feather light loads using AA hulls and silver claybuster 7/8 oz wads. 7/8oz of shot?

Link to comment
Share on other sites

Hey Bob:
This is a good one.

Clays Superlite shotshell:
Worked this out with a Hodgdon's tech on the phone.
AA or Remington Hull
Win 209 Primer
13.9 grains Clays (MEC #25)
grey wad
7/8 ounce shot
Lighter than a featherlite shell
Knocks 'em down every time
--Dawg

Link to comment
Share on other sites

13 minutes ago, Prairie Dawg, SASS #50329 said:

Hey Bob:
This is a good one.

Clays Superlite shotshell:
Worked this out with a Hodgdon's tech on the phone.
AA or Remington Hull
Win 209 Primer
13.9 grains Clays (MEC #25)
grey wad
7/8 ounce shot
Lighter than a featherlite shell
Knocks 'em down every time
--Dawg

+1, thats my load as well, although I round it off to 14 grns. of Clays

Link to comment
Share on other sites

4 hours ago, Prairie Dawg, SASS #50329 said:

Hey Bob:
This is a good one.

Clays Superlite shotshell:
Worked this out with a Hodgdon's tech on the phone.
AA or Remington Hull
Win 209 Primer
13.9 grains Clays (MEC #25)
grey wad
7/8 ounce shot
Lighter than a featherlite shell
Knocks 'em down every time
--Dawg

Yep that's a good one...14gr of Clays or Red Dot works fine.

Link to comment
Share on other sites

same load as Dawg's, but with 13 gr of clays,,,,  

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.