Jump to content
SASS Wire Forum

WTC


Hoss

Recommended Posts

Two similar scenarios 

 

dualist draws pistol, not happy with grip. Puts crown of muzzle (pointing straight down) against shelf while regripping 

 

Shooter loads pistol with muzzle pressed (pointing straight down) against loading table. 

 

 

Link to comment
Share on other sites

15 minutes ago, Widder, SASS #59054 said:

Sounds like the shooter didn't break the 170.

and pistol never left the shooters hand.

 

No Call

 

..........Widder

 

Both broke 170. 180 straight down ( maybe my OP was not clear!) 

Link to comment
Share on other sites

straight down, 90 degrees, is only 5 degrees of the 170  pretty close to make a call,,,,  the 170 applies at the LT as well

 

Link to comment
Share on other sites

26 minutes ago, Cheyenne Culpepper 32827 said:

straight down, 90 degrees, is only 5 degrees of the 170  pretty close to make a call,,,,  the 170 applies at the LT as well

 

The 170° doesn’t always apply at the loading table. It depends on stage design. For instance, the way the stages at EOT are designed, the 170° doesn’t apply at the loading or unloading tables. 

Link to comment
Share on other sites

55 minutes ago, Hoss said:

Both broke 170. 180 straight down ( maybe my OP was not clear!) 

 

Ah, you've changed a key part of your WTC description.

 

That would make a difference in the call, as Smokestack has already addressed.

 

..........Widder

 

Link to comment
Share on other sites

59 minutes ago, Cheyenne Culpepper 32827 said:

straight down, 90 degrees, is only 5 degrees of the 170  pretty close to make a call,,,,  the 170 applies at the LT as well

 

The 170º rule – Common Sense Approach

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.