evil dogooder Posted July 12, 2019 Author Share Posted July 12, 2019 28 minutes ago, Cheyenne Ranger, 48747L said: ED how long does it take to machine one, from start to finish? any off-machine work before? (probably get it to the overall dimensions) It takes 4 operations. So you have to adjust the jaws . Actual run time is 15 minutes roughly. We just cut blocks roughly 1/2 an inch larger than the final dimensions and mill it down Link to comment Share on other sites More sharing options...
Yul Lose Posted July 13, 2019 Share Posted July 13, 2019 1 hour ago, evil dogooder said: It takes 4 operations. So you have to adjust the jaws . Actual run time is 15 minutes roughly. We just cut blocks roughly 1/2 an inch larger than the final dimensions and mill it down Did you write the program for the CNC? Link to comment Share on other sites More sharing options...
Driftwood Johnson, SASS #38283 Posted July 13, 2019 Share Posted July 13, 2019 57 minutes ago, Yul Lose said: Did you write the program for the CNC? Of course he did. It isn't that hard. I had to look sideways at the first photo to figure out what I was looking at. As a former CNC programmer/operator my hat is off to you. Good luck with your venture. Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted July 13, 2019 Share Posted July 13, 2019 ED-PLZ give some serious thought to make 'screw-kits' to replace the screws on various guns. Both blued and SS. I would really like to see a 'kit' for my 1981 made Marlin 94. The screws that Marlin makes today, looks like the came from the Braille Institute's night shift. Respectfully, OLG Link to comment Share on other sites More sharing options...
evil dogooder Posted August 9, 2019 Author Share Posted August 9, 2019 After a couple late nights working with a fine file and I think I've got it. To those who showed interest in being a test dummy I'll be contacting you this week. I came up with an adjustable spring that I'm going to try next. It purpose is to fine tune. So don't have to tweak your ammo just adjust a spring. Theoretically speaking you could adjust from a .45 colt to a 45 cowboy and back with just a twist of the wrench Link to comment Share on other sites More sharing options...
Tyrel Cody Posted August 9, 2019 Share Posted August 9, 2019 2 minutes ago, evil dogooder said: After a couple late nights working with a fine file and I think I've got it. To those who showed interest in being a test dummy I'll be contacting you this week. I came up with an adjustable spring that I'm going to try next. It purpose is to fine tune. So don't have to tweak your ammo just adjust a shipping. Theoretically speaking you could adjust from a .45 colt to a 45 cowboy and back with just a twist of the wrench Interesting, wonder if a 44 Russian would work in 44-40? Link to comment Share on other sites More sharing options...
Colorado Coffinmaker Posted August 10, 2019 Share Posted August 10, 2019 Tyrell .. Not really. You can get the 44 Russian to go off but the chamber size is so much different it's not really a good idea. However .... 44 Russian can work a treat in a 44 Special toggle Rifle with the appropriate cartridge stop Link to comment Share on other sites More sharing options...
evil dogooder Posted August 10, 2019 Author Share Posted August 10, 2019 2 hours ago, Tyrel Cody said: Interesting, wonder if a 44 Russian would work in 44-40? Do you have the specs for both? Link to comment Share on other sites More sharing options...
Cemetery Posted August 10, 2019 Share Posted August 10, 2019 Will these be for Uberti, original Winny's, Miruko's, or all three? Link to comment Share on other sites More sharing options...
evil dogooder Posted August 10, 2019 Author Share Posted August 10, 2019 10 hours ago, Cemetery said: Will these be for Uberti, original Winny's, Miruko's, or all three? Right now they are set up for uberties. I'm rebuilding an original 73 that will be next to fit. I only have my personal rifles to work on and I don't have a miruko Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.