Jump to content
SASS Wire Forum

45 70 sharps loads


Tennessee Snuffy

Recommended Posts

I been working on various loads for my Shilo sharps 45 70 with 1 in 18 twist.  I have been loading various IMR 4198 loads and various Bullet weights from several suppliers and I am not happy with my results.

 

What powder and amount do other cowboys use behind 405 g lead bullets (rnfp)?

 

thanks

Tennessee Snuffy 

Link to comment
Share on other sites

My Shiloh Sharps seems to like Montana Bullet 535 grn. 25 Grns of 5744. My chrono malfunctioned so I don’t know exact speed but suspect around 1150 FPS. Still a work in progress, but enjoying the task. 

 

This is is my 200 yd target from last Friday. 

 

 

 

B888D47A-F7CB-44D2-99C3-91E71D17B392.jpeg

Link to comment
Share on other sites

I used to shoot 405gr (RNFP) from my Pedersoli 34" 1:18 barrel but have now gone up to 535gr for longer reach (I shoot these out to 600M).

 

I was using 34gr of ADI 2207 (its the same as H4198 and is "similar" to IMR 4198) with the 405gr proj. When I get home on Wed (its Tue here) I will check my data and I can give you some FPS velocities (from memory it was around 1350/1400 fps).

 

I now use 22gr of 2205 ("similar" to Accurate 5744) to push the 535gr at around 1140fps.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.