Classic Old West Arms Posted April 30, 2019 Share Posted April 30, 2019 19", 20" AND 24" Available Aluminum Sleeve Kit for Uberti 1873 and 1866 Rifles for 38 Special only, comes with stainless follower and stainless magazine spring. Simply remove the magazine tube cap, remove old spring and follower, drop in new stainless follower and spring and reinstall the magazine tube cap. WHILE THEY LAST - PRICE IS $69.00 PLUS $6.50 SHIPPING I accept PayPal. You can reply on this page that you want one or you can email me at outlawgambler@gmail.com I use pay pal or you can send check. Link to comment Share on other sites More sharing options...
Double Barrel, SASS 34765 Posted April 30, 2019 Share Posted April 30, 2019 What is the length? Link to comment Share on other sites More sharing options...
Classic Old West Arms Posted April 30, 2019 Author Share Posted April 30, 2019 20 inch and 24 inch, same price. Link to comment Share on other sites More sharing options...
Classic Old West Arms Posted May 12, 2019 Author Share Posted May 12, 2019 BTT WITH PRICE REDUCTION Link to comment Share on other sites More sharing options...
Outlaw Gambler Posted May 24, 2019 Share Posted May 24, 2019 btt Link to comment Share on other sites More sharing options...
Moe T Vator Posted May 30, 2019 Share Posted May 30, 2019 howdy, What is the purpose of this? Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted May 30, 2019 Share Posted May 30, 2019 2 hours ago, Moe T Vator said: howdy, What is the purpose of this? Better round alignment into the carrier, for the smaller diameter .38's. OLG Link to comment Share on other sites More sharing options...
Outlaw Gambler Posted May 31, 2019 Share Posted May 31, 2019 Lumpy is correct. The Uberti rifles are made with the same sized magazine tube for both the .45 Colt and the .38 Special/.357 Magnum. The result is that when the .45 Colts are loaded into the magazine they line up pretty well. However in your .38 Special rifle they look like this: Wedging and hang-ups can occur and that results in the hitch in the action. With the Cowboy Gunworks Smooth Cycle Sleeve Kit your .38 Special cartridges line up like this: This tube is of a smaller diameter that allow's the 38's to align straighter and to feed easier and smoother. Link to comment Share on other sites More sharing options...
Moe T Vator Posted June 4, 2019 Share Posted June 4, 2019 Thanks got it! Link to comment Share on other sites More sharing options...
Sloe Moe Posted July 1, 2019 Share Posted July 1, 2019 Can I still shoot .357 out of it? Link to comment Share on other sites More sharing options...
Classic Old West Arms Posted July 1, 2019 Author Share Posted July 1, 2019 I measured a 357 brass around the head stamp, .0430. same place on 38 special was .0432. So the answer is yes the tube will work with 357 rounds. Link to comment Share on other sites More sharing options...
Outlaw Gambler Posted August 4, 2019 Share Posted August 4, 2019 btt Link to comment Share on other sites More sharing options...
PW McKlintock Posted August 16, 2019 Share Posted August 16, 2019 I would like one, I have an 18 inch barrel on my Uberti do you have one for this barrel length? Link to comment Share on other sites More sharing options...
Outlaw Gambler Posted August 16, 2019 Share Posted August 16, 2019 I will check when I go to the shop and get back to you. Link to comment Share on other sites More sharing options...
Sloe Moe Posted September 28, 2019 Share Posted September 28, 2019 I'll take one of them 20 inchers, e-mail incoming... Link to comment Share on other sites More sharing options...
Irish Pat Posted October 19, 2019 Share Posted October 19, 2019 Have you tried one in a Winchester? Link to comment Share on other sites More sharing options...
Outlaw Gambler Posted October 20, 2019 Share Posted October 20, 2019 I have not, mostly because I don't own a Winchester. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.