Catlow4697 Posted March 8, 2019 Share Posted March 8, 2019 I need the Dillon part number for converson Kit for the XL 650 for the 38 S&W cartridge Yes I have checked the web sight and the blue press . If I had a RL 550 press I would be ok but I can't find a listing for a XL 650 or Square deal. tried to call Dillon but was only 15 th in line. I tried the 38 -357 mag shell plate but the rim is to large to fit thanks CATLOW Link to comment Share on other sites More sharing options...
Three Foot Johnson Posted March 8, 2019 Share Posted March 8, 2019 The difference appears to be 0.0075" - seven and a half thousandths of an inch, less than the thickness of two pieces of printer paper. Rim diameter is the same, so the same locating pins will work. A polishing stone in a Dremel will open them all up in just a few minutes, and it will probably still work fine for .38/.357. Link to comment Share on other sites More sharing options...
Catlow4697 Posted March 9, 2019 Author Share Posted March 9, 2019 Thanks J BarBinks I will give it a try Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.