Sedalia Dave Posted January 15, 2019 Share Posted January 15, 2019 Link to comment Share on other sites More sharing options...
Pat Riot Posted January 15, 2019 Share Posted January 15, 2019 Oh Crap! Link to comment Share on other sites More sharing options...
Subdeacon Joe Posted January 15, 2019 Share Posted January 15, 2019 So THAT'S what caused the knocking! Link to comment Share on other sites More sharing options...
Sedalia Dave Posted January 15, 2019 Author Share Posted January 15, 2019 So that's why the Johnson Bar needed fixing. Link to comment Share on other sites More sharing options...
Sixgun Sheridan Posted January 15, 2019 Share Posted January 15, 2019 That's nothing. In my auto shop class back in the 1980s the teacher showed us a head off a small block Chevy where the mechanic removed it from the engine despite forgetting to remove the short outboard bolts. When he got frustrated wondering why it wouldn't come off he used a large pry bar. Well he finally got it off... well, most of it anyway. The rest of it was left behind on the block! . Link to comment Share on other sites More sharing options...
Perro Del Diablo Posted January 15, 2019 Share Posted January 15, 2019 56 minutes ago, Pat Riot, SASS #13748 said: Oh Crap! Still not words I would be saying. Of course the wrath I would receive if I expressed them hear Link to comment Share on other sites More sharing options...
Wild lead Posted January 15, 2019 Share Posted January 15, 2019 That identical thing happened to me I was 16 years old 300 miles from home on interstate 64 mile marker 80 sitting along the interstate with a dumb look on my face and $17 in my pocket parents unaware I was going to Indiana chasing a girl I'd met that summer. Small block Chevrolet center bottom plate screw on a two-barrel carburetor went through the intake and through the valve and cracked the head and left a mark on top of the piston. Chasing that girl was the best thing I ever did after 30 years I wouldn't know what to do without her Link to comment Share on other sites More sharing options...
Utah Bob #35998 Posted January 15, 2019 Share Posted January 15, 2019 Re-bar I calls it. Link to comment Share on other sites More sharing options...
Smuteye John SASS#24774 Posted January 15, 2019 Share Posted January 15, 2019 I'm worse with tools than I am with nuts and bolts. Link to comment Share on other sites More sharing options...
largo casey #19191 Posted January 15, 2019 Share Posted January 15, 2019 Built a FE engine for a fella once.Working on carb his ownself.Dropped a 1/4 nut down the intake. Eh , just figured it would blow out the Exhaust,.. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.