Diamond Curly SASS#57086 Posted September 1, 2018 Share Posted September 1, 2018 I tried removing the pin on the wheel axle to remove the wheels and it did not budge. Any trick I need to do to remove the wheels? Thanks, DC I tried their Web page and no luck. Link to comment Share on other sites More sharing options...
Texas Lizard Posted September 1, 2018 Share Posted September 1, 2018 If i remember right you push the center of the rim and hold down and pull out... Texas Lizard Link to comment Share on other sites More sharing options...
cajun bandit Posted September 1, 2018 Share Posted September 1, 2018 push the pin in and pull the wheel Link to comment Share on other sites More sharing options...
Choctaw Jack Posted September 1, 2018 Share Posted September 1, 2018 Diamond Curly, Like TL says push in on the center of the wheel hub while pulling out on the wheel Bought an RG cart in February and had the same trouble getting the wheel off.The hub had come apart internally called the company and I was told that they had received a batch bad wheels from their supplier. They sent a new wheel on warranty. Link to comment Share on other sites More sharing options...
Diamond Curly SASS#57086 Posted September 1, 2018 Author Share Posted September 1, 2018 Thanks for the information. Went back to the shed and off they came. All four bolts holding the frame together had lost all the nuts. Now I can replace all of them at one time. They must not use locking nuts on these bolts. Glad I saw one missing before the cart fell apart. DC Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted September 1, 2018 Share Posted September 1, 2018 18 minutes ago, Diamond Curly SASS#57086 said: Thanks for the information. Went back to the shed and off they came. All four bolts holding the frame together had lost all the nuts. Now I can replace all of them at one time. They must not use locking nuts on these bolts. Glad I saw one missing before the cart fell apart. DC What bolts are are these? OLG Link to comment Share on other sites More sharing options...
Diamond Curly SASS#57086 Posted September 1, 2018 Author Share Posted September 1, 2018 1 minute ago, The Original Lumpy Gritz said: What bolts are are these? OLG There are four bolts that connect the main frame together. Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted September 1, 2018 Share Posted September 1, 2018 1 minute ago, Diamond Curly SASS#57086 said: There are four bolts that connect the main frame together. OK-I have an early first generation cart. No frame bolts. Just looked at the RG site, and looks like they have changed the wheel design. http://www.ruggedgear.com/index.cfm/page/ptype=product/product_id=214/category_id=180/mode=prod/prd214.htm OLG Link to comment Share on other sites More sharing options...
Texas Lizard Posted September 2, 2018 Share Posted September 2, 2018 2 hours ago, Diamond Curly SASS#57086 said: Thanks for the information. Went back to the shed and off they came. All four bolts holding the frame together had lost all the nuts. Now I can replace all of them at one time. They must not use locking nuts on these bolts. Glad I saw one missing before the cart fell apart. DC I have a lot of practice with that type of axle release...They are the kind we now use the wheelchairs...Use to take the wheels off and kick frame in back seat... Texas Lizard Link to comment Share on other sites More sharing options...
Diamond Curly SASS#57086 Posted September 2, 2018 Author Share Posted September 2, 2018 2 hours ago, The Original Lumpy Gritz said: OK-I have an early first generation cart. No frame bolts. Just looked at the RG site, and looks like they have changed the wheel design. http://www.ruggedgear.com/index.cfm/page/ptype=product/product_id=214/category_id=180/mode=prod/prd214.htm OLG Once you learn the trick it is not to bad to take apart. Thanks for your help Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted September 2, 2018 Share Posted September 2, 2018 12 hours ago, Diamond Curly SASS#57086 said: Once you learn the trick it is not to bad to take apart. Thanks for your help Where are these bolts located on the frame? My RG cart has no such bolts. TNX, OLG Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.