Hoss Posted May 14, 2018 Share Posted May 14, 2018 a while back somebody posted about a way to use a Lee case collator on a Dillon 650. I searched, but no luck. Seemed like it was a pretty regular poster. Anyways, I bought a Dillon, but I don't have the overhead space for the case feeder where I currently have my press. I'm going to try to make the Lee case collator/feeder work, I found a guy that 3D prints some sort of adapter, but was hoping for more info Anybody have any info???? Link to comment Share on other sites More sharing options...
Eyesa Horg Posted May 14, 2018 Share Posted May 14, 2018 The Bunkhouse master may disapprove, but, a Sawsall can work wonders on head room. Link to comment Share on other sites More sharing options...
Lead Friend, SASS #53635 Posted May 14, 2018 Share Posted May 14, 2018 I’ve got two 650s. I hand load my cases into the tube about thirteen at a time. It’s kind of self-regulating and gives me a chance to check other things. I can still load about 200-250 an hour. Link to comment Share on other sites More sharing options...
Patagonia Pete Posted May 14, 2018 Share Posted May 14, 2018 Here you go ... https://www.youtube.com/watch?v=xqZBMKABZqI .... but ... have you seen the DAA mini case feeder ?? https://www.doublealpha.biz/mini-xl650-case-feeder Link to comment Share on other sites More sharing options...
McCandless Posted May 14, 2018 Share Posted May 14, 2018 With the Dillon Case Feeder, can't the support pipe and plastic feed tube be shortened? Just wondering. Link to comment Share on other sites More sharing options...
Jackaroo, # 29989 Posted May 14, 2018 Share Posted May 14, 2018 3 hours ago, Hoss said: a while back somebody posted about a way to use a Lee case collator on a Dillon 650. I searched, but no luck. Seemed like it was a pretty regular poster. Anyways, I bought a Dillon, but I don't have the overhead space for the case feeder where I currently have my press. I'm going to try to make the Lee case collator/feeder work, I found a guy that 3D prints some sort of adapter, but was hoping for more info Anybody have any info???? It was me Hoss, I make a little bracket works like a charm and costs only $15.00 shipped. Link to comment Share on other sites More sharing options...
Badlands Bob #61228 Posted May 15, 2018 Share Posted May 15, 2018 Yea, I don't think the Lee case feeder with all that tubing is going to solve his height problem. I just measured my Dillon 650 case feeder and it only sticks up 10 1/2" above the top of the powder hopper. Of course, you would need some room to put cases in and change out the shell feeder plate. Link to comment Share on other sites More sharing options...
Titus A. Gnatsass, SASS #71705 Posted May 15, 2018 Share Posted May 15, 2018 I've got one of Jackaroo's brackets. Like he said....$15 and it works like a charm! Link to comment Share on other sites More sharing options...
Hoss Posted May 15, 2018 Author Share Posted May 15, 2018 48 minutes ago, Badlands Bob #61228 said: Yea, I don't think the Lee case feeder with all that tubing is going to solve his height problem. I just measured my Dillon 650 case feeder and it only sticks up 10 1/2" above the top of the powder hopper. Of course, you would need some room to put cases in and change out the shell feeder plate. My problem is towards the rear of my bench, the front has plenty of room. I think.... the Lee case collator will work if I can get it hooked up. And save $239! Link to comment Share on other sites More sharing options...
Hoss Posted May 15, 2018 Author Share Posted May 15, 2018 14 hours ago, Jackaroo, # 29989 said: It was me Hoss, I make a little bracket works like a charm and costs only $15.00 shipped. Jackaroo, send me one! I sent you a PM Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.