Jump to content
SASS Wire Forum

SPF Original 1887 10 Gauge with Drop Two.


Recommended Posts

Up for sale is an original Winchester 1887 10 Gauge with a Lassiter drop two installed.  The shotgun sports the original 30” barrel that has been honed and is shiny but has some minor pitting.  The action is smooth, fast and works as it should.  The lower tang where it meets the receiver had a small crack,  It was welded and strenthened by Lassiter.  The shotgun was reblued at some point and the wood refinished.  The forearms are in very good shape except for a missing piece on the rear left side as can be seen in the pictures.  The Butt stock is in simalar condition with a small surface crack on the left wrist.  This shotgun is a must have for the Black Powder Warthog looking to change up his game.  Price is $ 900.00 shipped 

 

This shotgun is an antique and can be shipped directly to you in most states.  

 

Please contact me with any questions.

 

Thank you for looking,

 

Chili

 

933F54D1-1E7A-419E-A187-9CA00CA93599.thumb.jpeg.ed7a6372c33cbdfe834bb7001a6d361c.jpegCE8A46F6-4CFE-4AF1-81E0-16FD92B99B98.thumb.jpeg.6ff0a294c708ba2df2e5a3432a66633b.jpegABC93709-4C65-4E8B-9133-DA77951B9A4D.thumb.jpeg.a152604808ca5a53d2e15ac2fd1fa7ac.jpeg32D2A240-E12C-44F0-89E5-2CDF1F83F92C.thumb.jpeg.c99f3dfad42a976669c915b21856c1bd.jpeg5B6FC024-3ED2-44D5-A270-4A72487C1E76.thumb.jpeg.e1a8111760fe2f9a61e765f8d2ea7517.jpeg2BD9FA45-8AED-4F7E-A954-E5DAFFACE368.thumb.jpeg.88bb9a42e4e66e8234b335539daa68f6.jpegE7A3E01F-0628-4D1F-BA85-E426C122A98C.thumb.jpeg.587384c1a1b44eb6070779aaa6932401.jpeg89C3FF44-AF98-4051-A1F0-E6743F9A0D19.thumb.jpeg.b35900ad8dbafed1674d57c3a8eacf2e.jpeg17426E92-F56E-4FEC-A180-510154514F10.thumb.jpeg.f7862691e8f3a69d73c8be1913893314.jpegA85361C0-4105-4198-AEC7-62D5F2CB460C.thumb.jpeg.47f0b346fb15dfaf85cfa5adecf8c955.jpegA1B8C822-6C35-4AB2-BC14-8A9F6C4E6CD6.thumb.jpeg.69e90b72b182f5649668cb4c0e15b40e.jpeg

B0EFE799-4FC6-4515-A691-2CC9CC63640F.jpeg

1DA037F1-64C4-4131-9B4C-B37BB464BBAB.jpeg

7D7B2AB1-10C7-40AD-8386-D4E0710608D0.jpeg

58A9382D-B0CF-455F-9266-FCF128D4B684.jpeg

Link to comment
Share on other sites

If this was a 12 gauge and a shorter barrel, I'd be all over it!  Awesome gun!  Good luck with the sale!

Link to comment
Share on other sites

Oh man, you’re killin me! 

 

Fo you have any brass hulls to throw in? 

Link to comment
Share on other sites

OLG,  no it is not a 1901,  all 1901s have the split lever safety,  87s do not. Also The double extractor started late second year / early 3rd year of production of the 87s so thats 1888 early 89  so please don’t put misinformation on my posts.   Thank you

 

Hoss,  Sorry I don’t have any brass or other hulls to send with it 

 

HossMunny,  If it was a 12 Ga. I wouldn’t be selling it but I’ll be happy to cut the barrel down for ya as soon as I get your check,  Hell I’ll even but the sight bead back on for ya.  HAHAHAHA. Thank you for the well wishes

 

Link to comment
Share on other sites

Just now, Chili Pepper Pete 11917 said:

OLG,  no it is not a 1901,  all 1901s have the split lever safety,  87s do not. Also The double extractor started late second year / early 3rd year of production of the 87s so thats 1888 early 89  so please don’t put misinformation on my posts.   Thank you

 

Hoss,  Sorry I don’t have any brass or other hulls to send with it 

 

HossMunny,  If it was a 12 Ga. I wouldn’t be selling it but I’ll be happy to cut the barrel down for ya as soon as I get your check,  Hell I’ll even but the sight bead back on for ya.  HAHAHAHA. Thank you for the well wishes

 

I told my wife, 'I'd hate to cut the barrel on an original!'  Again, good luck!!

Link to comment
Share on other sites

HossMunny,  But think about how this original wants to be shot again and feel good about itself as being useful 100 plus years later. It wont mind a little trimming,  think of it as cutting the grey ear hairs out of this old soul, you could do that, save this gun from a lonely existence...   Just messing. Thanks again :P

Link to comment
Share on other sites

2 minutes ago, Chili Pepper Pete 11917 said:

HossMunny,  But think about how this original wants to be shot again and feel good about itself as being useful 100 plus years later. It wont mind a little trimming,  think of it as cutting the grey ear hairs out of this old soul, you could do that, save this gun from a lonely existence...   Just messing. Thanks again :P

If I cut the gray hairs on this old soul, I would be bald...

 

Texas Lizard

Link to comment
Share on other sites

17 minutes ago, Chili Pepper Pete 11917 said:

OLG,  no it is not a 1901,  all 1901s have the split lever safety,  87s do not. Also The double extractor started late second year / early 3rd year of production of the 87s so thats 1888 early 89  so please don’t put misinformation on my posts.   Thank you

 

Hoss,  Sorry I don’t have any brass or other hulls to send with it 

 

HossMunny,  If it was a 12 Ga. I wouldn’t be selling it but I’ll be happy to cut the barrel down for ya as soon as I get your check,  Hell I’ll even but the sight bead back on for ya.  HAHAHAHA. Thank you for the well wishes

 

PLZ read my post again-It was a question ONLY.

You did NOT indicate, when it was made in your original post.

Carry on,

OLG

Link to comment
Share on other sites

On 3/14/2018 at 5:45 PM, Kougarok George said:

I will take it, please pm me

 

Good for you! Not everyone can say they bring an artillery piece to a match! If you are fortunate enough to be able to shoot in a night match with this, I highly encourage you to do so.

Link to comment
Share on other sites

14 minutes ago, Dirty Dan Dawkins said:

Properly loaded, it'll shoot some impressive flames!

Send me that info...I want impressive flames!....Sounds like something for night shoots...Or a whole lot of smoke to upset the the counters....

 

Texas Lizard

Link to comment
Share on other sites

On 3/15/2018 at 9:09 PM, Texas Lizard said:

Send me that info...I want impressive flames!....Sounds like something for night shoots...Or a whole lot of smoke to upset the the counters....

 

Texas Lizard

 120 grains 1 f.......

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.