Widder, SASS #59054 Posted January 10, 2017 Share Posted January 10, 2017 Do any of you have a 'pet' load you prefer in your 10mm. I plan to get a SIG P220 in 10mm. There is plenty data in the manuals but I'm wondering if any Wire Pards might have a good PET load to share. If my PM box is full, feel free to email me at: widder1894@icloud.com Much thanks, ..........Widder Quote Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted January 10, 2017 Share Posted January 10, 2017 Blue Dot w/200gn bullet. OLG Quote Link to comment Share on other sites More sharing options...
Duffield, SASS #23454 Posted January 11, 2017 Share Posted January 11, 2017 Blue Dot w/200gn bullet. OLG +1 Quote Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted January 11, 2017 Author Share Posted January 11, 2017 Thanks Lumpy and Duffield. I'll have to check out the BLUE DOT data. ..........Widder Quote Link to comment Share on other sites More sharing options...
Duffield, SASS #23454 Posted January 11, 2017 Share Posted January 11, 2017 Sent you a PM. Duffield Quote Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted January 11, 2017 Share Posted January 11, 2017 Load towards the top end on powder charge. OLG Quote Link to comment Share on other sites More sharing options...
Three Foot Johnson Posted January 11, 2017 Share Posted January 11, 2017 The only 10mm I've ever owned is a full size Glock 20SF. I use a max load of 800X and a Hornady 180 gr XTP - more than the max load listed on Hodgdon's online reloading data center Web page, but in line with other online sources. Blue Dot, Longshot, 800x, and AA#9 seem to be the most often used powders for full power loads. Quote Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted January 11, 2017 Author Share Posted January 11, 2017 J BAR, I use #9 and Power Pistol in my .357 SIG. Both powders give high velocity performance and good accuracy in my SIG P320. ..........Widder Quote Link to comment Share on other sites More sharing options...
J. Mark Flint #31954 LIFE Posted January 12, 2017 Share Posted January 12, 2017 FFFFg- full case, heavy compression Quote Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted January 12, 2017 Author Share Posted January 12, 2017 FFFFg- full case, heavy compression You Da Man! ..........Widder Quote Link to comment Share on other sites More sharing options...
Church Key, SASS # 33713 Posted January 12, 2017 Share Posted January 12, 2017 My Glock 20 works fine with Armscorp 180 FMJ's, but not with Underwood 180's. It cycles the slide too fast, trapping the ejecting brass. I've tried a Wolf 22lb spring setup, but it still does it. I don't reload for this critter as it is just a plinking gun for me. I shoot a box of 50 every now and then. Can get the Armscorp's for about .40 cents each, so reloading is just not in my current picture, considering I'd have to get the kit for my 550 at about $150 for the setup. I do keep an eye out for a used kit; no luck yet. Quote Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted January 13, 2017 Share Posted January 13, 2017 My Glock 20 works fine with Armscorp 180 FMJ's, but not with Underwood 180's. It cycles the slide too fast, trapping the ejecting brass. I've tried a Wolf 22lb spring setup, but it still does it. I don't reload for this critter as it is just a plinking gun for me. I shoot a box of 50 every now and then. Can get the Armscorp's for about .40 cents each, so reloading is just not in my current picture, considering I'd have to get the kit for my 550 at about $150 for the setup. I do keep an eye out for a used kit; no luck yet. You have a magazine spring problem. Get some Wolff extra power mag springs. OLG Quote Link to comment Share on other sites More sharing options...
Church Key, SASS # 33713 Posted January 14, 2017 Share Posted January 14, 2017 Lumpy Gritz - I also installed Wolf mag springs at the same time, forgot that I ordered them with the spring assembly. Did not solve the problem. I was thinking about a 24 # spring, but just not worth fooling with. This is the only Glock I've ever owned that's fussy and not totally reliable. It works fine with Armscorp and Remington ammo, so I'll just give the Underwood away. Quote Link to comment Share on other sites More sharing options...
SlicLee SASS #16638 Life Posted January 17, 2017 Share Posted January 17, 2017 WIDDER BUNCH' O NUTS AT 10 MM FORUM- have fun Lee Quote Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted January 17, 2017 Author Share Posted January 17, 2017 WIDDER BUNCH' O NUTS AT 10 MM FORUM- have fun Lee I can fit right in on that one..... Thanks. ..........Widder Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.