El Viejo Lobo Posted December 27, 2016 Share Posted December 27, 2016 I just wore out my second case tumbler this year. My first was a Frankfort Armory and the second an RCBS. Both were used heavily and suffer the loss of the same upper bearing. Anyone have better luck with other brands? Quote Link to comment Share on other sites More sharing options...
Michigan Slim Posted December 27, 2016 Share Posted December 27, 2016 My tumbler from Cabelas has ran well. I just cleaned and lubed the bearings last week. A pain to do but after burning up my RCBS I don't mind so much. 1 Quote Link to comment Share on other sites More sharing options...
Tucker McNeely Posted December 27, 2016 Share Posted December 27, 2016 Switch to the FA wet system w/ ss media. 2 Quote Link to comment Share on other sites More sharing options...
Cliff Hanger #3720LR Posted December 27, 2016 Share Posted December 27, 2016 (edited) When I was reloading commercially, tumblers where something that would break down. I ran 4 tumblers 3 hours per day. (used a mechanical timer on a plug strip) Â I tried different brands. Gem Stone was a good one but the company closed. I tired all the Dillon, Frankford Arsenal, Midway, and other known manufacturers. Â Then I tried one from Harbor Freight. I have been I have two harbor Freight and two Lyman Turbo Twin tumblers. Â I learned quickly that it was cheaper to replace the broken tumblers with new ones. I did replace three motors and they ran about a couple of months before failing again. Â The four tumblers I have, have ran 4 to5 days a week and maybe 6 years before I closed the business. They are still in the shop for personal use. Â Central Machine tumbler The only thing I dislike about this tumbler is the bolt through the lid is metric. It was hard to find a rubber thumb nut to replace the wing nut. I finally gave up and use the metal wing nut that came with the tumblers. Â Lyman Turbo Twin If you watch these at the different shooting suppliers, they go on sale for 2 for one every so often. Edited December 27, 2016 by Cliff Hanger #3720LR Quote Link to comment Share on other sites More sharing options...
Yusta B. Posted December 27, 2016 Share Posted December 27, 2016 I just wore out my second case tumbler this year. My first was a Frankfort Armory and the second an RCBS. Both were used heavily and suffer the loss of the same upper bearing. Anyone have better luck with other brands? If you buy a Lyman, keep the bowl from the FA. It works better for me than the Lyman bowl. Quote Link to comment Share on other sites More sharing options...
TN Mongo, SASS #61450 Posted December 27, 2016 Share Posted December 27, 2016 Love my rebel 17 tumbler. Quote Link to comment Share on other sites More sharing options...
Ozark Shark Posted December 27, 2016 Share Posted December 27, 2016 I've been using a Thumler Model B Rotary Tumbler with stainless media to wet tumble a couple of batches of brass a week for the last 5 years. It still looks and runs like new. Hasn't required maintenance beyond normal cleaning and lube. Quote Link to comment Share on other sites More sharing options...
Garrison Joe, SASS #60708 Posted December 27, 2016 Share Posted December 27, 2016 Been running an RCBS vibratory bowl heavily for about 8 years now. The trick on that one (and most others) - at least each year, take the darn thing apart, clean and lube the bronze bushings with a good lube (Royal Purple gun oil is what I have used), blow out all the media dust, then reassemble all the stinking little screws and bolts. Â When it slows a little, it's time for the clean and lube. Put that off, and the bearing and then motor will burn up. Â Good luck, GJ Quote Link to comment Share on other sites More sharing options...
Jasper Agate Posted December 27, 2016 Share Posted December 27, 2016 I've been running a Thumbler's tumbler for more than thirty years. I ran dry media for the first twenty years or so. Tried the ceramicmedia then went to SS pins and never looked back. Well worth the investment! JA Quote Link to comment Share on other sites More sharing options...
Cheyenne Ranger, 48747L Posted December 27, 2016 Share Posted December 27, 2016 Love my rebel 17 tumbler. +1 Â since they rotate and don't vibrate I think (hope) they will last longer. Only run it 2 hours per load, too 1 Quote Link to comment Share on other sites More sharing options...
Randy Saint Eagle, SASS # 64903 Posted December 27, 2016 Share Posted December 27, 2016 I just wore out my second case tumbler this year. My first was a Frankfort Armory and the second an RCBS. Both were used heavily and suffer the loss of the same upper bearing. Anyone have better luck with other brands? Lobo, I had a motor go out on a Frankfort, went to an RCBS and the motor mounting holes broke out. Now I put them together and have a Frankenstien tumbler. May try a Thumblers when this breaks. Â Randy Quote Link to comment Share on other sites More sharing options...
Nickel City Dude Posted December 27, 2016 Share Posted December 27, 2016 RCBS stuff is usually under guarantee. If you give them a call they may replace it free. Quote Link to comment Share on other sites More sharing options...
Coffin Filler #51633 Posted January 1, 2017 Share Posted January 1, 2017 I have had a Lortone tumbler for 40+ years with no issues but it is rather small. I have both the small and large Dillon units and so far so good. I find the vibratory units work better but are noisy. Â When they fail...and they will...I will probably make a larger version of the Lortone. Â Coffin Filler Quote Link to comment Share on other sites More sharing options...
Garrison Joe, SASS #60708 Posted January 1, 2017 Share Posted January 1, 2017 RCBS stuff is usually under guarantee. If you give them a call they may replace it free. Â Not the motors on vibratory cleaners, unfortunately. They source them out of China and know how fast they will go out. Â Good luck, GJ Quote Link to comment Share on other sites More sharing options...
Long Branch Louie Posted January 1, 2017 Share Posted January 1, 2017 I've been using a Thumler Model B Rotary Tumbler with stainless media to wet tumble a couple of batches of brass a week for the last 5 years. It still looks and runs like new. Hasn't required maintenance beyond normal cleaning and lube. +1, I just got one, it is much better made than any of the cheap knock-offs and it's made in USA.... Quote Link to comment Share on other sites More sharing options...
Blue Wolf , SASS# 29424L Posted January 2, 2017 Share Posted January 2, 2017 I have a Hornady M-2. I've been using it for last 11 years. With amount of brass yall go through maybe a mortar mixer would be good. 1 Quote Link to comment Share on other sites More sharing options...
Hikes Point Hank Posted January 2, 2017 Share Posted January 2, 2017 No surprise that vibration kills the bearings after a while. The rotarys with stainless pins are hard to beat for longevity as the bearings just rotate instead of being pounded by an out of balance situation to cause vibration. Especially when loaded heavily. Quote Link to comment Share on other sites More sharing options...
Mud Marine,SASS#54686 Life Posted January 2, 2017 Share Posted January 2, 2017 Eventually blew out all of my vibratory tumblers but one tiny one.I am now a confirmed Thumler user. Â I shoot SASS matches two to four times each month, shoot bullseye weekely, BPCR, teach CCW and demonstrate and practice a lot. The Thumlers can't be beat. Quote Link to comment Share on other sites More sharing options...
Rowdy Bishop, SASS #48453 Posted January 5, 2017 Share Posted January 5, 2017 I burn up 2 Lymans, a RCBS and a Dillon. Replaced motors with ones I bought from Graingers and so far they are all still running. Â Rowdy Quote Link to comment Share on other sites More sharing options...
The Coconino Pistolero, SASS # 72432 Posted January 5, 2017 Share Posted January 5, 2017 RCBS stuff is usually under guarantee. If you give them a call they may replace it free. My RCBS was from 1986. For the cost of shipping there they got it working fine again several times. I only use it for tumbling off case lube now. Â Have a heavy duty tumbler for pins and ceramic. Quote Link to comment Share on other sites More sharing options...
Noz Posted January 6, 2017 Share Posted January 6, 2017 I've been using a Thumler Model B Rotary Tumbler with stainless media to wet tumble a couple of batches of brass a week for the last 5 years. It still looks and runs like new. Hasn't required maintenance beyond normal cleaning and lube. Mine leaks so bad that I don't like to use it. Any suggestions? Quote Link to comment Share on other sites More sharing options...
Totes Magoats Posted January 6, 2017 Share Posted January 6, 2017 I have a Thumlers Vibratory tumbler. Works great, quiet, no issues. Quote Link to comment Share on other sites More sharing options...
Rex M Rugers #6621 Posted January 6, 2017 Share Posted January 6, 2017 Mine leaks so bad that I don't like to use it. Any suggestions? I am a little surprised by that , Noz. I have one that I have been using for about 30 years , still doesn't leak. I did change the motor , but still have the original rubber liner and lid gasket. I will consider myself lucky. My first guess would be try to get a new gasket and/or liner. Rex Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.