Red Cent Posted September 14, 2016 Share Posted September 14, 2016 Have any you installed reduced power springs on the Charter Arms Pit Bull? And if you have, where did you get them? Will any of the other revolver models use the same springs? Link to comment Share on other sites More sharing options...
Boggus Deal #64218 Posted September 14, 2016 Share Posted September 14, 2016 My go to spring company is Wolff Gun Springs. I have never put any in a Charter but that is where I would look. https://www.gunsprings.com/ Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted September 14, 2016 Share Posted September 14, 2016 The only gunspring maker I will use is Wolff. They are also OEM to many gun makers. OLG Link to comment Share on other sites More sharing options...
Red Cent Posted September 14, 2016 Author Share Posted September 14, 2016 I always go to Wolff. They don't have it listed. They have the Bull Dog and I would bet they will interchange. Just curious if anybody had the same experience. Link to comment Share on other sites More sharing options...
Marauder SASS #13056 Posted September 14, 2016 Share Posted September 14, 2016 In the past, I contacted Wolff and they were helpful with such info. Link to comment Share on other sites More sharing options...
Red Cent Posted September 14, 2016 Author Share Posted September 14, 2016 Hey M. I called them. They have a hammer spring for the Bull Dog listed. No trigger springs for any Charter Arms. Numrich has factory trigger spring for the Bull Dog. I think I will get the BD spring from Numrich because I think they will interchange and if I break it, I can put the original back. The spring is of the torsion type. Coil spring with ends protruding at 10 and 2. Wayyyyyyyy too strong. I will try to "unroll" a coil. Or two Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.