Tater Head Posted June 30, 2016 Share Posted June 30, 2016 Howdy pards, I am trying to bring and old Lyman 45 back to life. Need cap and handle. Let me know what you have and what you want for it or them. Thanks for looking. Tater Link to comment Share on other sites More sharing options...
Muleshoe Bill SASS #67022 Posted July 1, 2016 Share Posted July 1, 2016 Give Lyman a call. They have parts Link to comment Share on other sites More sharing options...
Tater Head Posted July 1, 2016 Author Share Posted July 1, 2016 Thanks Muleshoe ! Link to comment Share on other sites More sharing options...
Wasatch Lawman Posted July 1, 2016 Share Posted July 1, 2016 I have an extra complete model 45 luber sizer, $60 shipped The handle can be bought from chapmanmfg.com for $6.75 The top cap I bet could be made from a PVC cap. You will find Lyman has no new parts for a 45s only the 450s and 4500s Wasatch Link to comment Share on other sites More sharing options...
Tater Head Posted July 2, 2016 Author Share Posted July 2, 2016 Thanks Wasatch! I'll check them out. I bought my 45 about ten years ago from one of the pards in our club. A little while later he gave me another for parts. It had the piston stuck in the bottom of the sizer and the handle had been lengthened for more leverage. That was about 10 years ago. I had forgotten all about it until I stumbled across it a couple a weeks ago and decided to rebuild it. got the piston out, cleaned out all the old lube, replaced the piston and painted it. needs a reservoir cap and a stock handle and it will look and work like it did fifty years ago. The cap for the model 450 will fit and only costs $2 but would like an original. I have a 450 but like the 45's better because they are easier to use. Thanks for your reply. Tater Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.