Rancho Roy Posted November 30, 2015 Share Posted November 30, 2015 It has been discussed many times on this forum and other about the possibility of the spring loaded magazine follower being released accidentally and the follower slamming into the cartridges in the magazine, setting them off with bullets against primers. There are reported cases of this happening at loading tables and during a stage when the magazine follower gets hung up on a prop and suddenly released with impending doom following. The second issue with the 1860 Henry when used in Cowboy Action Shooting is the possibility of the magazine follower hitting the shooters hand and impeding the loading of the last three or four rounds depending on where the off hand is holding the barrel. CAS folks will cut a piece of 3/8" dowel about 4.5" long and insert it after the ten rounds are loaded, thereby creating room for the off hand and allowing unimpeded loading of the final three or four rounds. I decided to "Kill Two Birds With One Stone" and build an extended magazine follower that limits the possibility of #1 and serves the same purpose as #2 I've detailed the fabrication on my web site for those with access to a lathe that might want to make one or have a machinist friend who owes them a favor whip one up. http://www.rvbprecision.com Now some folks (not on this forum.....) will start to take this thread in another direction by claiming it isn't needed. "They have loaded thousands of rounds in an 1860 Henry with no issues". "We are being overly cautious". "If you can't load a Henry properly you shouldn't own one". Etc.Etc.Etc. I suggest we let the owners of the 1860 Henry decide for themselves if this is a modification they might like to pursue. Thanks! Link to comment Share on other sites More sharing options...
Larsen E. Pettifogger, SASS #32933 Posted November 30, 2015 Share Posted November 30, 2015 Very nice piece of work. Link to comment Share on other sites More sharing options...
Blastmaster Posted November 30, 2015 Share Posted November 30, 2015 good job. Looks like a winner. Link to comment Share on other sites More sharing options...
Tyrel Cody Posted November 30, 2015 Share Posted November 30, 2015 Would you be willing to make these for others? For a small fee of course. Link to comment Share on other sites More sharing options...
Abilene Slim SASS 81783 Posted November 30, 2015 Share Posted November 30, 2015 Very elegant, Roy. Link to comment Share on other sites More sharing options...
Yul Lose Posted November 30, 2015 Share Posted November 30, 2015 Man, that would look cool in brass, but much heavier. Link to comment Share on other sites More sharing options...
Rancho Roy Posted November 30, 2015 Author Share Posted November 30, 2015 Thanks folks..... When I get some time I'll make a few for folks that want them. But I'll have to make one end with a threaded adjustment for different length needs. Brass would be too heavy and cause a problem of its own if it was dropped down the tube against loaded rounds. Link to comment Share on other sites More sharing options...
travelin kid #51083 Posted November 30, 2015 Share Posted November 30, 2015 Thanks folks..... When I get some time I'll make a few for folks that want them. But I'll have to make one end with a threaded adjustment for different length needs. Brass would be too heavy and cause a problem of its own if it was dropped down the tube against loaded rounds. I like it, interested in one myself Link to comment Share on other sites More sharing options...
Griff Posted November 30, 2015 Share Posted November 30, 2015 I like it, interested in one myself Make that 2. Err... one for him and one for me... (I do only have one Henry)! Link to comment Share on other sites More sharing options...
H. K. Uriah, SASS #74619 Posted December 1, 2015 Share Posted December 1, 2015 I use a wooden spacer myself, but that looks really cool. I'd seriously consider purchasing one. Link to comment Share on other sites More sharing options...
Blackwater 53393 Posted December 1, 2015 Share Posted December 1, 2015 Have you done any testing?? Neat concept. Link to comment Share on other sites More sharing options...
Rancho Roy Posted December 1, 2015 Author Share Posted December 1, 2015 Not yet...Will get to it this weekend Link to comment Share on other sites More sharing options...
Blackwater 53393 Posted December 1, 2015 Share Posted December 1, 2015 I hope you have a way of releasing the follower that let's you stay out of harm's way. You should try it with eight or fewer cartridges, filled with something inert to approximate gun powder and live primers and real lead bullets. My accident happened with eight live rounds in the magazine and the follower released from the same point as an open magazine in distance. If the primers go off, you still have some work to do. Good luck!! I sincerely hope that it works!!! Link to comment Share on other sites More sharing options...
Earl Brasse, SASS #3562 Posted March 22, 2016 Share Posted March 22, 2016 Any updates? Link to comment Share on other sites More sharing options...
Buffalo Dick, SASS #12880 Posted March 23, 2016 Share Posted March 23, 2016 I missed this first time around. I would be interested in one if you decide to produce them. Link to comment Share on other sites More sharing options...
Carolina Gunslinger Posted March 23, 2016 Share Posted March 23, 2016 I'm going to submit an idea for those in waiting. Why not 3m adhesive 4" of wacky noodle foam to a 73 follower and use that? When it gets bendy soak in PB Blaster and rinse and repeat? That should give the shock absorption that is sought to prevent detonation. Link to comment Share on other sites More sharing options...
Yusta B. Posted March 23, 2016 Share Posted March 23, 2016 Man, that would look cool in brass, but much heavier. Gold anodized Aluminum ? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.