irish ike, SASS #43615 Posted October 17, 2015 Share Posted October 17, 2015 Where would one by lowered hammers for these? Thanks Ike Link to comment Share on other sites More sharing options...
Doc Fill 'Em 67797 Posted October 17, 2015 Share Posted October 17, 2015 Midway USA. If they are out of them when you order put them on backorder and you will get them eventually, usually in a few weeks. But if you are lucky they will have them. You want Super Blackhawk hammers. Link to comment Share on other sites More sharing options...
Larsen E. Pettifogger, SASS #32933 Posted October 17, 2015 Share Posted October 17, 2015 Ruger, Brownells, Midway. You are looking for the Ruger Super Blackhawk or Montado hammer. (Montado is the same as the SBH but has checkering instead of serrations. The serrations give a better grip on your thumb IMHO.) http://www.midwayusa.com/product/841361/ruger-hammer-assembly-ruger-super-blackhawk-hunter-stainless-steel?cm_vc=ProductFinding http://www.brownells.com/schematics/Ruger-/Super-Blackhawk-sid723.aspx Part #28. Link to comment Share on other sites More sharing options...
Sedalia Dave Posted October 17, 2015 Share Posted October 17, 2015 Midway USA carries Super Black Hawk and Bisley hammers. Just have to find them in stock. Link to comment Share on other sites More sharing options...
irish ike, SASS #43615 Posted October 17, 2015 Author Share Posted October 17, 2015 Thanks everyone. Ike Link to comment Share on other sites More sharing options...
Chili Ron Posted October 17, 2015 Share Posted October 17, 2015 Howdy, I have been told that some come pretty rough. I was lucky enuf to git a couple that had been on guns and they are pretty smooth, dropped right in. Best CR Link to comment Share on other sites More sharing options...
Larsen E. Pettifogger, SASS #32933 Posted October 17, 2015 Share Posted October 17, 2015 I checked my parts box and have some extras. If you need a pair they are $67.00 shipped. Let me know. Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted October 17, 2015 Share Posted October 17, 2015 Got some from Midway. They came with very sharp edges that need'd some attention. You can use green Scotchbrite to duplicate the factory finish. Larsen's price is VERY fair That said-There maybe an interference issue using the new hammers with the bottom of the cyl pawl contacting the grip frame. OLG Link to comment Share on other sites More sharing options...
irish ike, SASS #43615 Posted October 18, 2015 Author Share Posted October 18, 2015 I'm looking at buying a pair of NM Vaquero's in 44-40. Action job no replacement hammers. Larson is always fair and a good source of info for most anything. Ike Link to comment Share on other sites More sharing options...
Larsen E. Pettifogger, SASS #32933 Posted October 18, 2015 Share Posted October 18, 2015 NM Vaquero is an ambiguous description. All Rugers with transfer bars are NM. There is the Vaquero and New Vaquero. They don't make New Vaqueros in .44-40. That means you have to look for a pair of used Vaqueros. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.