Crawdaddy Posted July 3, 2015 Share Posted July 3, 2015 I've looked at the chart, how are you loading .38s with 125 tc and red dot Thanks in advance for your info. Link to comment Share on other sites More sharing options...
Sixgun Seamus Posted July 4, 2015 Share Posted July 4, 2015 Sent you a PM Link to comment Share on other sites More sharing options...
Marauder SASS #13056 Posted July 4, 2015 Share Posted July 4, 2015 Depending on your loader, it can be a little difficult to get consistent velocities with Red Dot in 38's. Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted July 4, 2015 Share Posted July 4, 2015 RD has a mind of it's own when loaded in small amounts through a powder measure. What powder measure are you using? OLH Link to comment Share on other sites More sharing options...
Bulls Head Bill SASS#33692 Posted July 4, 2015 Share Posted July 4, 2015 ?.....how are you loading .38s with 125 tc and red dot Thanks in advance for your info. Minimum published for the pistol......4.1 for the rifle......both with a good ROLL crimp! Link to comment Share on other sites More sharing options...
Crawdaddy Posted July 4, 2015 Author Share Posted July 4, 2015 Use a Lee turret press with Lee power disc, load one check powder (eyeball) place in lead and crimp all after 1 or 2 hundred rounds. ( I weigh several powder charges beforehand) Link to comment Share on other sites More sharing options...
John Boy Posted July 4, 2015 Share Posted July 4, 2015 http://www.handloads.com/loaddata/default.asp?Caliber=38%20Special&Weight=All&type=Handgun&Source= Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.