Sagerider Posted April 30, 2014 Share Posted April 30, 2014 Any recommendations for web locations that have reasonable detail for disassembly of a 92? Thanks for the recommendations. Sagerider Link to comment Share on other sites More sharing options...
Fillmore Coffins, SASS #7884 Posted April 30, 2014 Share Posted April 30, 2014 Try here... http://marauder.homestead.com/files/RossiDis.html Fillmore Link to comment Share on other sites More sharing options...
Lefty Dude, SASS # 51223 Posted April 30, 2014 Share Posted April 30, 2014 Reeves; PM me your address, and I will loan you a DVD that was produced on the subject. Link to comment Share on other sites More sharing options...
Cliff Hanger #3720LR Posted April 30, 2014 Share Posted April 30, 2014 I have looked in the 1892. I have watch good gunsmiths take them apart and reassemble them. My opinion is, disassembly is not really difficult. Putting it back together, is not a job for me. ----------------- My instructions are to clear rifle of all ammunition. Place in hard lockable hard case. Put case with rifle in truck. Make sure to have money for lunch and gas. Travel to gunsmith and ask if he would mind working on my rifle. Can I get you lunch? ------------------ I have several 1892 Winchester clones. I shoot them to the point of abuse. They run rather well and have since 1992 when I started in this game. But I will have a gunsmith do the disassembly and reassembly of my 1892s. Thank you very much for being there. Link to comment Share on other sites More sharing options...
Cpt Dan Blodgett, SASS #75655 Posted April 30, 2014 Share Posted April 30, 2014 Took me 3 or 4 times longer to reassemble than take apart. Mentioned that on the wire was told to put empty brass on bolt prior to attempting to put bolt in receiver Link to comment Share on other sites More sharing options...
Abilene Slim SASS 81783 Posted May 1, 2014 Share Posted May 1, 2014 best to have someone show you or have a DVD to watch. Reassembly the first time around is b***h. After that it's easy. Good luck! Link to comment Share on other sites More sharing options...
Tom Bullweed Posted May 1, 2014 Share Posted May 1, 2014 Visit the Marauder website. Use the empty brass to contain the ejector. It is not as bad as an M1-Carbine complete teardown or a Browning double-matic or a Ruger Mark I or II. Link to comment Share on other sites More sharing options...
Rattlesnake Slim Posted May 1, 2014 Share Posted May 1, 2014 If it is an original Winchester 1892, look here http://www.homestead-service.com/cart/Books_EBook.htm. The book is $16.95 but it made disassembly and reassembly easy for me. Lots of pictures and clear language. Link to comment Share on other sites More sharing options...
Gunner Gatlin, SASS 10274L Posted May 1, 2014 Share Posted May 1, 2014 Try this.... http://store.stevesgunz.com/index.php?main_page=product_info&cPath=1&products_id=2 GG ~ Link to comment Share on other sites More sharing options...
Rooster Ron Wayne Posted May 1, 2014 Share Posted May 1, 2014 Try this.... http://store.stevesgunz.com/index.php?main_page=product_info&cPath=1&products_id=2 GG ~ +1 Any one who is shooting a 92 will benefit from Steve's Video. Respect Steve and the sport and BUY your own copy Link to comment Share on other sites More sharing options...
hey galloway 21316 Posted May 2, 2014 Share Posted May 2, 2014 I bought a browning 92 that had the spring on the cartage stop in backward 2 trips to gunsmith before we found out what was wrong they are hard to put back together. Hey Galloway Link to comment Share on other sites More sharing options...
Rooster Ron Wayne Posted May 2, 2014 Share Posted May 2, 2014 I bought a browning 92 that had the spring on the cartage stop in backward 2 trips to gunsmith before we found out what was wrong they are hard to put back together. Hey Galloway Not that hard at all . If you pay attention to the video and to what you are doing . And with some mechanical ability . Its not that bad at all. If you buy Steves Gunz video http://store.stevesgunz.com/index.php?main_page=page&id=14 ( best info out there ) There are a lot of videos on youtube to watch. They are really not so bad to work on. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.