Dirt Merchant # 61422 Posted January 23, 2013 Share Posted January 23, 2013 This is a Long Forcing Cone Reamer. It takes out the forcing cone to allow a better pattern and less recoil. used very little. Had the shank turned to accept a 1/2" standard chuck. Made it much more versatile. Still extremely sharp and in excellent condition. It is on Ebay starting at $55, no reserve. you can buy it for $90. Original cost $199, shipping $12 http://i328.photobuc...erchant/005.jpg http://i328.photobuc...erchant/006.jpg http://i328.photobuc...erchant/007.jpg http://i328.photobuc...erchant/008.jpg Link to comment Share on other sites More sharing options...
Garrison Joe, SASS #60708 Posted January 23, 2013 Share Posted January 23, 2013 Just for everyone's knowledge about this, as the reamer's sleeve is marked LFC, this is a long forcing cone reamer, for putting a long taper on the forcing cone. Not to be confused with a chamber reamer for cutting the chamber on a barrel. Right, Dirt? Good luck, GJ Link to comment Share on other sites More sharing options...
Dirt Merchant # 61422 Posted January 23, 2013 Author Share Posted January 23, 2013 Just for everyone's knowledge about this, as the reamer's sleeve is marked LFC, this is a long forcing cone reamer, for putting a long taper on the forcing cone. Not to be confused with a chamber reamer for cutting the chamber on a barrel. Right, Dirt? Good luck, GJ YES and thank you for putting that out there, Dirt Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.