Pulp, SASS#28319 Posted January 17, 2013 Share Posted January 17, 2013 Check out MidwayUSA. http://www.midwayusa.com/product/733110/product?cm_mmc=M_Spop-Email-_-Clearance-_-Clearance_115201316_1-_-Product3&cm_mmca1=pulp@valliant.net&cm_mmca2=CustNum=100229073 Link to comment Share on other sites More sharing options...
irish ike, SASS #43615 Posted January 17, 2013 Share Posted January 17, 2013 Starline has them for $21.20/100!. Ike Link to comment Share on other sites More sharing options...
Guest Chief Posted January 17, 2013 Share Posted January 17, 2013 I have been shooting 32/20 since 1956, and been reloading them, Remington brass is not very good must be trimed after every fireing, Starline is the best, have never had to trim any of them. I own 7 32/20 and do a lot of shooting, Starline is well worth the money. I have no connection with starline just like their product Link to comment Share on other sites More sharing options...
Awful Close Posted January 17, 2013 Share Posted January 17, 2013 To help keep my 32H&R rounds and 32-20 rounds from getting confused, I purchased new nickelled Rem brass for the 32-20. My Marlin hated them. Went back to yellow brass and never ever had a problem. It never occurred to me to check the length on the new Rem brass. I have never used anything but Starline for 32-20 since then. Link to comment Share on other sites More sharing options...
Barrelhouse Bob, SASS#22663 Posted January 18, 2013 Share Posted January 18, 2013 If you reload 32-20 brass of different manufacturers, be sure to trim them all to the same length. I found that Winchester, Remington, and Starline are all different lengths. If I remember correctly, Winchester was the shortest and Remington was the longest. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.