Doc Cherokee, SASS#48332 Posted July 8, 2012 Share Posted July 8, 2012 I've been having a recurring problem with my concealed carry gun, a Colt Commander series 80..It has an adjustable trigger with a recessed allen screw and for the second time the allen screw has moved around enough to make the trigger hard if not impossible to pull..I have an allen wrench I keep taped to my guide rod wrench, it's a simple matter to readjust it when it happens..My concern is it happening when (God forbid) I might really need to have the pistolo to be in top working order..I'm wondering if it might not be a bad idea to put a dab of locktite on the allen screw to keep it in place? And which locktite would be the best? The blue stuff? Link to comment Share on other sites More sharing options...
BLACKFOOT SASS #11947 Posted July 8, 2012 Share Posted July 8, 2012 Yep, that will work and for a personal defense gun I would not set the trigger stop at absolute zero. I would allow for a reasonable amount of overtravel. My personal choice would to use a "Nylock" stop screw rather than Loctite. Your mileage may vary. Blackfoot Link to comment Share on other sites More sharing options...
Happy Jack, SASS #20451 Posted July 8, 2012 Share Posted July 8, 2012 Remove the screw completely. The pistol will still work fine. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.