Skihi John SASS #57443 Posted November 15, 2011 Share Posted November 15, 2011 Anyone making replacement plungers? I know its not a separate part, and the fix was to send it back to Marlin. Any idea's guys? Link to comment Share on other sites More sharing options...
Larsen E. Pettifogger, SASS #32933 Posted November 15, 2011 Share Posted November 15, 2011 Depends on what's wrong. If the retainer has fallen off what has worked for me several times is to go to ACE Hardware and get a tiny e-clip. There is typically a groove left where the retainer fell off and the e-clip will snap into that groove. I have a couple that have been on for several years with no problems. Link to comment Share on other sites More sharing options...
Adirondack Jack, SASS #53440 Posted November 15, 2011 Share Posted November 15, 2011 yup, and if it's missing, ask around about junk carriers to salvage one from and do the e-clip fix above. Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted November 16, 2011 Share Posted November 16, 2011 That would be a 1/8" e-clip. also, ifn you lost your spring, you can use an appropriate size ball point pen spring. ..........Widder Link to comment Share on other sites More sharing options...
Skihi John SASS #57443 Posted November 16, 2011 Author Share Posted November 16, 2011 well, its missing. whipped up one on the lathe, just figured someone out there was making them. Problem around here is finding 1/8 clips. Ended up borrowing one off a rem 700 trigger. whole lot of labor for a 50 cent part. Thanks guys Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.