Pit Bull Tex Posted August 11, 2011 Share Posted August 11, 2011 I am looking for a hand depriming tool for 444 cal. shells.Anyone have one or know if they make one.Going to use the 444 for shotgun shells. Link to comment Share on other sites More sharing options...
Bad Hand Posted August 11, 2011 Share Posted August 11, 2011 I use a Lee universal decaping/depriming die: http://www.midwayusa.com/viewProduct/?productNumber=136543 and a lee hand press: http://www.midwayusa.com/viewProduct/?productNumber=665540 Link to comment Share on other sites More sharing options...
Ace_of_Hearts Posted August 11, 2011 Share Posted August 11, 2011 It's usually called a punch and a hammer! Use to be that it was the only way to deprime military brass. Link to comment Share on other sites More sharing options...
Doc Fill 'Em 67797 Posted August 11, 2011 Share Posted August 11, 2011 Take a block of wood, drill a small hole in it, take a punch and hammer, knock out the primer. Link to comment Share on other sites More sharing options...
Marlin Buckhorn,SASS 51727 Posted August 11, 2011 Share Posted August 11, 2011 Pit Bull Tex Call Buffalo Arms and see if they have anything that might work. BPCR shooters use something similar from what I understand. Good luck, Marlin Link to comment Share on other sites More sharing options...
Duffield, SASS #23454 Posted August 11, 2011 Share Posted August 11, 2011 RCBS makes, or made, a depriming tool for use with their Posi Prime hand tool. I have one, and it works well. It contains the case inside a thick steel tube while the primer is being pressed out. Link to comment Share on other sites More sharing options...
Garrison Joe, SASS #60708 Posted August 11, 2011 Share Posted August 11, 2011 And consider the Lyman 310 tool, if you want to spend more. But the Lee decapping kit for military rounds is what I use for knocking out a few primers of something odd-ball. Good luck, GJ Link to comment Share on other sites More sharing options...
Pit Bull Tex Posted August 11, 2011 Author Share Posted August 11, 2011 LYMAN 310 dont have one for 444. Link to comment Share on other sites More sharing options...
Gunstock Smith Posted August 11, 2011 Share Posted August 11, 2011 Bad Hand's method is the best. Many BPCR shooters use it for depriming their brass prior to cleaning it. Works for ANY caliber. Gunstock Smith Link to comment Share on other sites More sharing options...
Pit Bull Tex Posted August 12, 2011 Author Share Posted August 12, 2011 Found all I need ,Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.