Cholla Bob Posted April 21, 2011 Share Posted April 21, 2011 Was looking through my dad's old "1960 Lyman 42nd edition Reloader's Handbook" and found this section on brass shot shell reloading and thought it might be of interest to some of y'all. Loading Brass Shotshells Cholla Link to comment Share on other sites More sharing options...
Knarley Bob Posted April 21, 2011 Share Posted April 21, 2011 Thanks, I made a copy. Haven't used the water glass yet...... Knarley Link to comment Share on other sites More sharing options...
The Shoer 27979 Posted April 21, 2011 Share Posted April 21, 2011 I use some 10 gauge over powder wads I accidentally order a long time ago, they work great. Thanks for the page i also save it Link to comment Share on other sites More sharing options...
Fairshake Posted April 21, 2011 Share Posted April 21, 2011 At the time of that printing, waterglass was used by most people. It is outdated as a much faster way now is with a glue gun and overshot card. The mini glue gun and not the large. Link to comment Share on other sites More sharing options...
Doc Coles SASS 1188 Posted April 21, 2011 Share Posted April 21, 2011 I have been using water glass (sodium silicate) for better than a decade and it works fine. I only load BP in my brass shells, for use in an original Spencer pump and a double, both with Damascus barrels. I got my bottle of water glass from the pharmacy, I went and asked the pharmacist and he found it in his books. You could probably find it on line these days. Over many years I have never used the entire bottle and sodium silicate crystals have precipitated in it (you can't reverse this by the way, it can only be done at very high pressures). Just for the folks who would like to try the old way. Link to comment Share on other sites More sharing options...
ol poke SASS 57567 Posted April 21, 2011 Share Posted April 21, 2011 I'm with Doc and only use Black Powder and only use waterglass. I've tried Duco cement and others, but the waterglass is my preference. BTW, the last jar I bought I found at a ceramics supply store. Apparently Sodium Silicate is used as a mold-release compound. Tellin' the cashier that you need some to seal brass shotgun shells is mucho funn-o! ol' poke Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.